Search results for query: *

What air breather are you going to use, low profile? https://www.edelbrock.com/heat-insulator-gasket-for-open-4150-square-bore-0-320-thick-9265.html Carburetor Heat Insulator #9265 Square Bore The Edelbrock Square-bore Heat Insulator Gasket #9265 is designed to prevent percolation on Edelbrock...

For best results post photos!

PM sent

Apologies for the inquisition but if it has a suregrip in it I would offer $100 to pull then ship it to me. I have the 7.25 in my 69 318 and that would make a nice addition! wouldn't you agree?

Any idea what gear ration or whether its open or sure grip?

Easy way to tell; the seats will automatically move forward if installed correctly and backwards if installed incorrectly. Its all about the spring strech, they strech while being pushed and are relaxed in the forward position.

How many miles on the Coach

Rockauto: https://www.rockauto.com/en/partsearch/?partnum=305dd

Yes, more photos would be great!

Dripper is a good catch for anybody replacing a timing chain.

Dam sex change crap is bullshit, got me "Shittin Kittens"

Muriatic Acid is used to clean concrete.

I was thinking that it could have been filled while on the bench or jack stands with the snout pointing downward!

Video with audio would be a big help. Did you make sure the starter in squarely bolted up?

Did you check the level with it on the ground?

How much? Did you check the level with it on the ground?

Is the kickdown in its proper location, I believe all the way forward at the trans or all the way forward at the carb, make sure its adjusted correctly.

I have one the front harness that I pulled out of a 65 Barracuda it appears to be a original. Apologies for the late reply I didn't see your Message until now. I can post better photos Monday if your interested. You can PM me. .

Link for the instructions for you to download/print: https://documents.holley.com/199r7923-2rev2.pdf

https://www.holley.com/products/discontinued_product/parts/0-4777C

Post a photo showing the part number on the cover. Arn't there two different seals?

Pretty sure there should be a cork O ring that goes on/in with the screw #oldmanmopar https://www.holley.com/products/fuel_systems/carburetor_components/brackets_and_linkage/parts/20-7 P

Your missing the rear set screw.

I have this also, basically the same but for warranty compliance.

Did you mount the seats in the factory location? The tracks on my 69 have alternate mount holes, see if yours are in the hole closed to the front if not you can knock the studs out and relocate them. You should see the top 3 brackets for the stock mounted buckets if not the car may have had a...

Very cool Post your for sale ad he for more traffic: https://www.forabodiesonly.com/mopar/forums/other-stuff-for-sale-or-wanted.42/?order=post_date&direction=desc

Straight down photo would help immensely.

Post a want ad.

Do they have any slip-on tubes on the driver side?