Separate names with a comma.
This is correct, and this is what I meant to say. Thank you for the clarification.
I will keep you posted. Based on what I've read here, I would have thought that it would turn your car into a twisted wreckage of undrivable...
Ok, I'll make sure to quantify any additional modifications in the future with an approximation of the skill level I foresee within the project....
Original bars cut down. Thanks on the paint. Lol since patina is that "in", the car is gonna look like different panels were from different race...
Contact your local sway bar manufacturer. They do that everyday. They have the tools to cut them down and polish them to remove all risers...
67Dart273, I don't recall asking if it was easy. If folks don't want to put the effort into making it work, no skin off my nose. I've seen it...
Good feedback guys, thanks. I have a custom tubular K member that will allow you to put the mounts where they need to be.
I literally had to scroll back up to see if my chassis guy posted that. He broke it down just like that. Especially the tie rod and rack location...
That's what basically the AJE kit is. QC is yuk, but the concept and overall design works great for drags. That loooooong strut gives you amazing...
Lol again, I don't wanna make this a poop show. I just want truths. I'll give you an example: I'm putting a turbocharged 4 banger in my drag...
This is for a drag race setup, suspension travel limited. I recently went for a ride in a car that did this. Car runs 8.80's in the quarter. The...
I would like some feedback from people who have actually done it. So much on forums these days are echoes of someone's brother's, cousin's,...
Bump, hood too!
Good stuff
I think I got mine off Amazon
Bump
Ttt
Too bad you aren't out here
Biggity bump!
Duster dash and 73 and up bumper.thanks!
Frankly, I'm not sure what piece is used, so I didn't quite know what I would be asking for. Didn't know if folks made their own or something.
Hey there guys, I have a set of aluminum spring eye bushing that are 2.05 in od and are the nominal 2.50 in width. However I don't have the steel...
Thanks!!!
Awesome thanks!!!
I was reading the thread last night, and couldnt find my answer: how long of a coil over can you put on here? Total travel? Thnx
I am located in SoCal, and am interested in the LCA's. However, I cant find any info on these on the site. Any linkies? thanks.
Whats the length from axle centerline to snubber centerline? Thnx
I honestly have no idea. Whats a fair price?
Who makes the "offset-est" one? Lol whos moves it over, or up the most? Believe it or not, my 4 banger Duster needs it. Big ol' horizontal...
This place is awesome!
