Search results for query: *

Inadequate

Steve I'm not suggesting that the fan is the sole problem here but first off you need to re-create the scenario of driving at say 60mph at roughly 3,000 rpm. You need lots of air flow. The rad your using maybe adequate as well. Again just my 2 cents. Good luck

It was sold and like a lot of new owners they like to change the name maybe to distance or distinguish them from previous owners ???

Place a large box fan on high speed directly in front of the radiator to simulate driving down the road. The smallish fan in the video is at an angle and not only too small but only used for a short period. The fan blade on the water pump is only sufficient at idle speed when stopped. Just my...

Member ir3333 I believe has one. He's located in Sterling Ontario Canada and I can't imagine what Shipping would cost ??

Yes as far as I know 68 doesn't have the vin # but the S.O.# stamped in several places including the rad support. And as well you could only get a 340 in a GTS in the dodge line up

I can see the horn button and the wheel but is the horn switch included and does it work ? Thanks.

Thanks. I'll review

Any other pictures. Maybe of the interior parts ? Is the numbers matching engine together or apart. Looking for finished car I presume ?

No problem.

So the first number 9 is the year 1969 model B represents Hamtramck assembly plant The last six digits are the numerical sequence on the assembly line. Whether it was a dart or Cuda I'm not knowledgeable enough to tell. Maybe someone else can help you there.

Should be room now

I'll clear some room so you can send your information if you wish

The Vin number just above the oil pan on the pass side might be a complete 13 digit or a partial Vin number. This number could help figure out exactly what vehicle your engine came out of. 1969 340's were only in darts and cudas but depending on the casting date could have found there way into...

No problem. Happy to help if I can.

This is what I got. If you can use them they're yours.

Are they the same as a 69 dart ?? If so I have a pair. I'll take a picture of what I got today and post

Also the year of duster, cause those rims are large bolt pattern I believe

It would help if we knew what kind/brand of disc brakes you have. Are they the kelsey hayes 4 piston calipers or some aftermarket ones like wildwood ??

What's the manufacturer's date on those L60 tires ? I would think they're old as they haven't used the letter designation for quite some time if my memory serves me. The rally wheels should be fine.

I agree. Even 15" are getting harder and harder to find.

Good advise. Can't check too much.

Cougar, kitten, coyote, monster or whatever it might be looks like a nice combo of machine and sport. Lol

Yes check with the FSM as stated by 4spdrag earlier. Iirc the torque is 45 ft lbs for drums and 55 ft lbs for disc. Good luck.

Looks like the road runner caught a nice coyote. Lol.

It sure looks like Cayuga Dragway Park

Don't blame ya. I did say it's bad. When I say it's good nobody believes me then either. Lol.

They're bad . Nothing to take pictures of.