Search results for query: *

Here I have a set (4 total) of aftermarket rallye wheel trims that are 14inches in diameter and 3 inches deep. These are brand new and only 1 trim ring was attempted to be installed from classic industries. Linked below are the exact ones I purchased Looking for $100 OBO + shipping costs...

Hey all, I recently purchased a duster with a 72 low compression 340. What aftermarket pistons could I use in order to increase the 8.5 CR to around 10:1? Before I go to my machine shop, I would like to get a general idea of my options besides milling the heads, increasing stroke and whatnot...

My plan is to replace the current j heads with edelbrock aluminum heads. I’m doing a top end rebuild

9.7:1 compression 340 with cast crank. no particular cam picked out yet but I want it to be street friendly. Looking for about 450 horsepower. 3.23 gears but converting to 3.73. Hoping to get a 2500 stall converter.

Hey all, I’m looking to do a hydraulic roller cam for my 72’ 340. It has J heads with 1.88/1.60 with stock crank and bore. There’s no complete kit for a hydraulic roller cam that I could find.What would I need in order to do this conversion? Thanks!

x2 on this. I had a bad knock that took some investigation. At first I thought it was piston slap… so then I thought about building a bore and stroke motor. But it ended up being loose flex plate bolts. Nonetheless the block is still very healthy, i wouldn’t bore it out unless I had to. I...

I plan on porting my J heads (or just invest in aluminum heads and get those ported), hydraulic roller, and some bolt ons. Going to a machine shop today to gauge how much they would charge here in NY.

Oh geez, at that point I might be better off building up the top end. Never realized how expensive it would get doing a stroker kit. I’m looking for something that’s very street able but can get me bragging rights. Thank you all for your input and help!

Hey FABO, I’ve been looking into building a 340 based stroker (416). I have stock bore so I will need machine work done. I was wondering what the cost (ballpark) will be in terms of labor if I buy all the parts for the stroker. I will be pulling the motor out of my car in order to bring it to a...

I was wondering where I could order one of these since I do not have a numbers matching car. I’d love to have one as a fender tag.

So the news is back. The driveshaft had a crooked weld and needs to be lengthened. My driveline guy is going to lengthen it by 3/4-1” along with replacing my u-joint. He is making a new one for me and it’s going to cost me $400. Sucks that I have to spend that much money on something I won’t...

I was thinking that the play is from the bushing for the tail shaft housing where the yoke rides on. I was also going to replace the transmission mount as well. Two birds one stone type of deal. More new parts more reassurance. The driveshaft that is currently on it now is 44.5”. I did what...

Okay, I just looked at the yoke, it’s just the orientation of how I took the photo, it doesn’t appear to be bent.

Now that I’m looking at it, you’re right! I’ll be sure to let my driveline tech know.

Hey FABO Tech, I just need some answers to what might be the issue to my driveline vibrations. This has been a problem since I have purchased my 71 duster that was swapped with a 340 and 727TF. I get these vibrations at around 60+ MPH (it is not a wheel balance issue as I have gotten them...

Hey FABO, I found these bucket seat tracks on eBay that were listed as “A-body bucket tracks”. Could anyone help identify if these even are a-body tracks, if so, what year? Thanks!

Hey FABO, I’m looking for the floor shifter linkages that connect to a 727. I’ve linked below pictures of what I need. I need everything from the “upper rod” down. Thanks FABO!

Looking for a complete shark tooth grill in drivers condition. Located in Long Island, NY

Would you sell seat tracks separate? If so how much?

Im looking for a relatively clean/uncut dash harness for my 71 duster. Preferably a rallye dash harness but a normal one will suffice since there are conversion charts within the forums page. PO somehow was able to get a 73+ dash harness in there and now it’s a rat nest worth of wires. Thanks...

could someone help me decode my build sheet? Really hard to find info without the proper knowledge. Thanks

I was wondering if anybody has ever purchased seat covers from Moparplus.com? I’m looking to buy this seat cover(6611-BEN Mopar 1970 Dart Duster Front Split Bench Seat Cover) for my 70 duster. If anybody has purchased something like this, how do these fit? Would you recommend redoing entire...

The aftermarket one goes up to 8k whereas the stock one goes only up to 6k. Is there any spacing difference in terms of the intervals if I put the new decal on it?

I didn’t even know these existed, will be buying one for my tach! Thank you!

Hey all, I’m installing a rallye tach into my dash and I’ve seen a few things on this forums page about how MSD could kill your factory tach. I don’t want to spend a good amount of money on a nice tach just for it to get fried by the electrical system. If this is true, should I buy a MSD Tach...

Looking for a tach for my rallye dash. Any year will do

the sparks are constant, so it’s not completing the circuit unfortunately

hey all, I have a duster with some MAJOR electrical issues. I hooked up the amp gauge since I was replacing it and put the car back together. Once put back together I hooked up the battery and nothing worked. Turns out the dash does not ground out for some reason (checked with a multimeter and...

If you’re still selling the one you sent me previously, pm me and we’ll talk numbers