Search results for query: *

  1. J

    Official 3rd Gen Hemi thread

    The short answer is you wouldn't want to use the MSD. Not only does it use a different wheel but the 392 has other features that you don't want to throw away by using a carburetor. Instead you'd use the factory PCM with an aftermarket wiring harness.
  2. J

    [SOLD] 1967 Dodge Dart

    Dart has been tentatively sold. If the sale falls through I'll re-list it. Regards, Joe Dokes
  3. J

    [SOLD] 1967 Dodge Dart

    In box is now empty.
  4. J

    Current prices for hemis

    I think the various prices reflect a number of things. Car vs Truck, truck cheaper. 03-09 vs 10-16 later eagle motors are worth more. 6.1 vs 5.7 6.1 worth a bit more. 6.4 worth the most. Does it have accessories? All of these factors affect the price.
  5. J

    Current prices for hemis

    I have an 06 6.1 for 3200
  6. J

    [WANTED] 67-76 4 speed console shifter

    I have one send me a pm
  7. J

    Need some advice

    The Hmmm let me think about it.
  8. J

    Need some advice

    Cuda, I've dropped the price to $3500.00 I think I might have it priced right, I might drop it down to 3K just to move it. As for why the sale, I realized that it was going to take a decade to finish the car. I just didn't have the money to move the project forward. Plus most of my hot...
  9. J

    [SOLD] 6.1 L Hemi GEN III

    Price lowered to $3500.00
  10. J

    [WANTED] A Body Roller for Drag Racing

    Yes, I have the headlight trim.
  11. J

    [WANTED] A Body Roller for Drag Racing

    Here's some pictures.
  12. J

    [WANTED] A Body Roller for Drag Racing

    I have a 67 dart and am located in Southern California. Pm me. Regards Joe Dokes
  13. J

    [SOLD] 6.1 L Hemi GEN III

    Price lowered to $3900.00
  14. J

    [SOLD] 1967 Dodge Dart

    Price lowered to $800.00.
  15. J

    [FOR SALE] Restored Hurst Shift Handle

    Still available. Price negotiable.
  16. J

    Need some advice

    Good idea listing on more sites, I have it on CL, here, and FB.
  17. J

    Need some advice

    The motor is complete with all accessories. No trans. I have a cable operated 85mm throttle body and adapter plate. Unfortunately I don't have the DBW throttle body. But I do have the factory computer. I would be also be willing to pull the pan and valve covers for anyone interested. And yes...
  18. J

    Need some advice

    Yes, yes it was. The price of mine is going to have to come down.
  19. J

    [FOR SALE] Restored Hurst Shift Handle

    Pristine Chrome Original Hurst Shift Handle from either late 1968 or early 1969. These sell at Brewer's Performance for $490.00, your price: $325.00. Note the zig zag in the lower bracket, this demonstrates that it is an A-Body and NOT a B-Body shift handle.
  20. J

    [SOLD] 1967 Dodge Dart

    Price lowered to $900.00
  21. J

    [SOLD] Hemi flywheel and pressure plate

    I am now selling the flywheel and pressure plate/clutch separately: Flywheel: $225.00 that's $125.00 off list Pressure plate, clutch, throw out bearing, $75.00
  22. J

    [SOLD] 4-Speed Center Console and shifter

    Price lowered to 700.00 I am willing to break up shift handle and center console.
  23. J

    Need some advice

    I've decided to sell my 6.1L Hemi. I have it listed in the for sale mechanical parts section and I started out with it listed at $4800 and have lowered the price to $4200 but so far there haven't been any offers. I originally bought the motor used, the person I bought it from assured me that...
  24. J

    No spark from coil???

    There is an air gap between the rotor and pickup, in the distributor, it needs to be set at .004" If the g is wider than that, no spark. The gap widens as the distributor gets warm, so sometimes you'll get a car that will start cold but not hot.
  25. J

    [SOLD] 4-Speed Center Console and shifter

    Sorry, I honestly don't know. I'd love to sell it to you, but I'd hate to say yes and mislead you. Regards Joe Dokes
  26. J

    Craftsman 12 pc deep impact sockets

    Good score, By any chance US made? I have a set of Taiwann made Craftsman Sockets that have served me well, but I 'm dubious of their Chinese tools. (Yes, I know that Taiwann is considered to be China by many, but in my experience tools stamped Taiwann tend to be of better quality than those...
  27. J

    [SOLD] 6.1 L Hemi GEN III

    Price lowered $4300.00
  28. J

    [SOLD] Hemi flywheel and pressure plate

    Read this thread. T-56 Transmission Install Thread Might have the answer you need.
  29. J

    [SOLD] Hemi flywheel and pressure plate

    Hmmmm, I honestly don't know. You'd definitely need a Chevy clutch disc with the correct 26 splines, I would THINK a 10.5" Chevy disc would work with a 10.5" Mopar pressure plate.
Back
Top