Search results for query: *

I offered $150 a few minutes ago. The list comes up asno longer available.

My 72 has tubes, the head I'm casing is a no tube head for "peanut plugs"

I have 3 cars with some heavier/upgraded/trick stock type parts, all have KYB's on the front and back, which seem more than adequate IMO. I recently replaced the front and back Bilstein shocks on my 2013 Challenger and the new ones came with a bunch of stickers...hmmmm

I would have bought just for the "graphics" :realcrazy:

I've never been able to save and post links, especially from FB. The guy with said it hasn't even been on a motor and he's had for years. He converted the car to a small block, and doesn't have it anymore. I see the smog connection in the photos, and see some of these later heads are "smog" and...

I have 225 72 Slant 6 with 4 barrel intake, not sure of the carb as it is in storage, I think it may be a 320 Holley. It runs pretty good and sometimes not so good. The valve train is very noisy and a couple cylinders have low compression. I plan to freshen up or completely rebuild it. That...

You guys get a chance to look for those bolts?

Anyone rolling gold colored wheels. I see a good deal on some new in box enkie RPF's, 18x8.5 et+40 x 4 =$699. As I said, they are gold in color, might look good on a black car

Thanks, I'll look forward to hearing from you

I'm looking for some some seatbelt bolts, specifically for the retractable shoulder belts on a 74 Duster. I'm using some that work, but they flop around like the shoulder is too small or too long. I surprised at the wide variety of bolts for the different years, types of seatbelts. :realcrazy:

What brand/model? Thank you

I like because I need a trunk floor and a gas tank. I asked about the wheels and tank. The tank is 64/65 Mustang and they wheels are from Klutch, not sure what model though.

:rolleyes:

I've decided to sell individual parts or take an offer.

I was having problems posting pictures here and i just figured it. I saw this car on the FB ABodiesOnly group this morning...kind of the look I'm going for. He also did something interesting with a Mustang gas tank. I have a Demon that needs a trunk floor and a gas tank. :thumbsup: :thumbsup:

I'm glad you chimed in.Trying to buy used wheels especially FB Market place, between lack of information and communication is an adventure. I've kind of moved on from the Subaru's not sure which direction I'll go. Sometimes you get lucky.

Thanks, I imagine a new hole saw can deal with the bore and have a 65/67 b body under mine. I know what you mean about brakes though

I have 17 Mustang wheels on my 70 Duster. They are OK, but I'm looking for something for a 74 that I'm working. I saw some 18x8.5 Enkei GTC-01 with +40 offset, which is about backset. The car has a 65/67 8.75 set up for an A body. So they may work, depending on the Not sure what that means or...

:mob:

I see lots of these wheels and aftermarket reiterations on FB marketplace pretty which look pretty cool and have the right bolt pattern 5x114.3. I'm not sure about the center bore though. Anyone using these? I'd like to post some pictures but my "media picker" doesn't seem to support pics I...

I did get the spacer off using my painters tool between the bearing, spacer and a couple light taps on the end with a hammer and it popped right off.

Shims and new races, bearings, and shims as it cried like a baby. Most responses mention the crush sleeve according to what I've read is specific to the 489. This is a 741 which my 65 Dart and 69 Plymouth service manuals show this spacer and a special tool used to measure/determine which shim to...

I'm trying to freshen up a 741. I see there is a spacer on the pinion shaft between the bearings. In order to change the inner bearing and add or subtract shims it needs to come off and it's stuck. I imagine it will come of when pulling the bearing? I sprayed it with some Kroil overnight and am...

Ron, your PM's are full; just letting you know the caps were delivered today. Very nice! Thanks

Possible delivery to Carlisle

Last chance to get that heavy metal you been looking for. Front and back bumper reinforments and loving restored front shock mounts. Won't last so act fast, $3 or best offer. Pick up in 08244

Anyone have experience with this? My 74 seats need some help but I have a line on some nice 70 front and back seats with a center armrest, which I'd really like. I know it won't be "correct", just as long as they will fit, especially the backs. Thanks

$450

I'm tired of moving it around...come get

My father says, "I got more money than brains" and my old boss used to say "You ain't worth a f*#k, but sure can take an *** chewin, so I'll keep you around". That said, I'm not easily discouraged.