Separate names with a comma.
don't overlook the fact that the float could have sunk if it's reading empty all the time.
" Back in the day " when these cars were just cars we...
I had a'70 New Yorker that came with a Holley.
not vented in the cap. there is a vent in the filler neck.
the Eddy is the most direct path to where you want to go.
sounds like you need to back off on the tension of the choke adjustment.
That's what is cool about this site, whatever you have going on someone here has been there!!!
could be :
Needle and seat bad
Float level too high
Fuel pressure too high.
My guess is the last one. Eddy carbs only like 5.5 lbs. I have had to...
We have an 800cfm Eddy 1812 on our 360. Stock magnum with a mild cam.
Many said it would be too big but it's not. runs perfect .
there is a rubber grommet in that hole that needs removed.
U got a big washer on the engine side of the firewall too? On our '66 Cuda the cable angles down as it goes thru, that would make it line up with...
Skip to 2.44 on the video
My 66 cuda has it. With no tube.
Has a pretty good howl with the single plane intake!!
Stock 273's are single plane.. i would run what you have..
If you pull the metering block and there is fuel behind the power valve.. It's blown...
Will this carb bolt to 2 bbl manifold cooljjay has on his engine now?? I imagine he has a BBD carter.