Separate names with a comma.
Detroit Muscle? 65'
Second in line for the voltage regulator. 65'
Congratulations! I typically use the rubber motor mounts with a polyurethane transmission mount. Glad you finally figured it out, now go out and...
PM sent! 65'
Damn, we would kill to have cars in that condition here in the rust belt! 65'
How much for the steering column? Shipping to 49236. Thx, 65'
Sounds great, I bet that car runs great on the street! 65'
The steel inertia ring will have more inertia than the aluminum. Unless you're running a super lightweight crankshaft system I'd use the steel. 65'
Oh hell, that's quite a bit of chips! 65'
I only use the cork china wall gaskets as templates to cut some out of thinner gasket material. And I never use the steel gaskets, Couple of daps...
That's how it's done gentlemen! 65'
He needs a kevlar fire suit at minimum! 65!
For a parts car, yes! Restoration, no! JMO 65'
Looks like you're using high quality components! The tunnel ram, carbs, and cam are the tough part. I have no experience there. Maybe someone will...
Just be aware that if you want something higher than a stock stall converter you will have to have it made. Early hi stall converters are not...
The 69 273 should have the large diameter crankshaft register. You will need a small block 904 from 67 or later that has the large torque...
Hell, I'd consider selling mine for that kind of money! 65'
I'm sure his buddy would be happy knowing his GTX will be well cared for! 65'
Nice launch, that thing rips! Congratulations on your win! 65'
Be careful with too much cam duration. It'll sound throaty but will not make much low end torque. 65'
Nice looking Barracuda! What engine do you have in there? I Love the foot gas pedal. Congratulations on completing your project! 65'
Great adventures Al! I always look forward to your sales here. Nice way to see the country and help people out at the same time! Thx for all you...
Engine gunk works great! 65'
Check In-Line Tube, they should have the correct transmission lines you need. 65'
That sure is a pretty pig you have there! 65'
Backfire through the carb means your timing is retarded! Poor some timing to that beast and let her eat! I'd recommend 12-16 deg. BTDC. 65'
That thing is cool, never seen one of those before! 65'
I have a n early Dakota V8, would like to know if they fit. 65'