This is a couple OEM Big Block Starter Dust Shields/Shim Plates. They
are originals, not china knockoffs. They are in good condition, but
could use a cleanup. $15.00 each, or $25.00 for both. Local pickup,
or buyer pays shipping.
This is a OEM Big Block Crankshaft/Harmonic Balancer Bolt & Washer.
It is original, not a china knockoff, and is in good condition. It
came off of a 1969 440HP, but fits the 350,361,383,400,413,426w,
and 440ci engines. $20.00. Local pickup, or buyer pays shipping.
This is an assorted lot of 1960's & 70's Engine Accessories Spacers and Long Bolts.
They are original, not china knock offs, and are in good condition, but could use a
clean up. $20.00. Local pickup, or buyer pays shipping.
This is a OEM Big Block Oil Pump Intermediate Shaft. It is original,
not a china knockoff, and is in good condition. It fits the 350, 361,
383, 400, 413, 426, and 440 engines. $30.00. Local pickup, or buyer
pays shipping.
1966/67 Mopar Hood Latch Striker Catch Bar w/Bolts.
It is original, not a china knockoff, and is in good
condition. It came off of a 1967 GTX, but may also work
on other years and models. The bolts are not pictured,
but are included. $25.00. Local pickup, or buyer pays
shipping.
This is a OEM 1967 to 69 Big Block Throttle Return Spring Bracket.
It is original, not a chinese repro. It may work on other years as
well. It could use a cleanup, but is in good condition. $20.00.
Local pickup, or buyer pays shipping.
(This is for 4 barrel engines, not Six Packs)
This is a OEM Big Block Fuel Pump Push Rod. It is original,
not a china knockoff, and in very good condition. It fits
the 350, 361, 383, 400, 413, 426w, 440, & 426 Hemi Engines.
$25.00. Local pickup, or buyer pays shipping.
This is a OEM Big Block Rear Main Seal Retainer with bolts. #2128895
It is original, not a china knockoff. It fits the 350, 361, 383, 400,
413, 426w, 440, and 426 Hemi BB engines. It is in good condition, with
no cracks or stripped threads. Just needs a good cleanup. $30.00. Local
pickup, or...
This is a OEM Big Block 727 Linkage Rod that goes from the
bellcrank to the pressure lever. It is original, not a
china knockoff. It came off of a 1968 GTX, but will also
work on many other big block years and models. I don't know
if it will work on small blocks. It is in good condition, but...
This is a Pair Of Mopar Small Block Head Gaskets. I bought
them for our 340 years ago and never used them. The 340 is
gone, the head gaskets are still here. :) $30.00. Local
pickup, or buyer pays shipping.
This is a OEM Big Block 727 Kick Down Rod W/Clip. It is original,
not a china knockoff. It came off of a 1968 GTX, but will also work
on many other big block years and models. I don't know if it will
work on small blocks. It is 13 3/4", and has the adjustable clip on
the upper end. It is in...
This is a Fuel Neck Filler Tube Grommet. It is in like
new condition. We bought it for our 1967 Belvedere years
ago, but could not get it to fit. I believe they sent us
the wrong one, so I'm not sure what Mopar this one is for.
These are the measurements. 1.85"ID, 2.80"OD, and the groove
is...
This is a Used OEM Aluminum Thermostat Housing #2780970. It
is in good used condition, but could use a cleanup. $20.00.
Local pickup, or buyer pays shipping.
This is a OEM Used Mopar Big Block Throttle Cable. It came off of
a 1964 Dodge with a 426w 4bbl engine. It is 20 3/4" long. I believe
it will also work on the 66 to 70 big block engines with a 2 or 4
bbl carb. The outer coating has a small wear spot as you can see
in the pics, but it...
This is a OEM 1960's Mopar PCV Valve. It is original, not a
china knockoff, and is in very good condition. It is correct
for many Mopar engines up until 1970. $25.00. Local pickup
or buyer pays shipping.
This is a Small Block Timing Cover Gasket Set. It fits the
LA 273 318 340 360. I don't know if it work on the newer
318/360 magnum engines. $20.00. Local pickup, or buyer pays
shipping.
This is a OEM 1974 Big Block Left Side Valve Cover. It came off
of a 1974 440ci. It is original, not a china knockoff, and is in
good condition. It was painted black at some point in it's life,
and has some spots of surface rust inside, so it needs a good cleanup
& repaint. The number on the...
This is a OEM 1966 to 73 727 Trans Throttle Pressure Lever
with bolt, nut, and washer. It is original, not a china
knockoff, and is in good condition. $20.00. Local pickup,
or buyer pays shipping.
This is a Set Of 340 Intake Gaskets. They are the soft ones
that work good with aluminum or cast iron intakes. They
should also work fine on the LA360. $25.00. Local pickup,
or buyer pays shipping.
This is a Holley 4bbl/6bbl Fuel Inlet Fitting. It came off
of a damaged center 6 pack carb many years ago. It is used,
and in decent driver condition with no damaged threads, but
could use a cleanup. $20.00. Local pickup, or buyer pays shipping.
(New ones are $51.70 at Summit)
Holley 2300...
This is a OEM Mopar 4 Groove Crankshaft Pulley. It came off of
a 1968 440ci engine with A/C & P/S, but I believe it will work
on several different years and engines. It is in good condition.
$35.00. Local pickup, or buyer pays shipping.
(The six OEM attaching bolts are not pictured, but are...
This is an Old Automobile Cigar Lighter. I don't remember what
it came out of, but you know it's old because it has "lighter"
spelled out instead of an idiot icon of a cigarette burning. :-)
$10.00. Local pickup, or buyer pays shipping
This is a Set Of 8 Used OEM 1968 440ci Rods & Pistons.
The pistons are standard bore flattops. They are in good
condition, just need a cleanup. Pistons #2843976 & Rods
#LY 1851535. $150.00. Local pickup, or buyer pays shipping.
They are about 50 pounds shipping weight.
This is a Pair Of 318ci SB Intake Manifold Gaskets. They
are the small port gaskets for the 318, not the one size
fits all compromise ones. $20.00. Local pickup, or buyer
pays shipping.
This is a OEM 1960's, 70's Throttle Stud. It is original, not
a china knockoff. It is for an auto trans, but can be used with
a stick. It is in good condition. $15.00. Local pickup, or buyer
pays shipping.
Does anyone have a use for some left over Holley Manual Choke Parts?
I bought the 45-223 kit 20+ years ago to convert to an electric choke.
These are the parts left after the conversion. $20.00. Local pickup
or buyer pays shipping.
(I also have a 42" choke cable if needed)
This is a OEM 1971 383 Throttle Cable/Kickdown Bracket. It is
Original, not a china knockoff. It is in good condition, but
could use a cleanup. It will also work on the 400ci, and may
work on other years and engines. $40.00. Local pickup, or
buyer pays shipping.
This is a OEM Oil Slinger for Mopar V-8 Engines. It came off a late
1960's 440, but I believe it fits all Mopar V-8 engines from 1960 to
1978. It is original, not a china knockoff, and is in good condition.
Just needs a cleanup. $15.00. Local pickup, or buyer pays shipping.