Search results for query: *

This is a OEM 1970 to 73 340 vacuum advance #3656066. It works good, but could use a cleanup. $25.00. Local pickup, or buyer pays shipping. This is the correct distributor vacuum advance for the following with 340 CID engine and electronic ignition: 1970-71 Plymouth Barracuda - 'Cuda - Duster -...

This is a Blue Bumper Jack with Tire Iron. I can no longer remember for sure what car it came out of, but I think it was my 1967 GTX I had many years ago. It is in good working condition, but could use a cleanup and repaint. The jack, base, and tire iron are blue. I don't have the hook for it...

This is a couple OEM Big Block Starter Dust Shields/Shim Plates. They are originals, not china knockoffs. They are in good condition, but could use a cleanup. $15.00 each, or $25.00 for both. Local pickup, or buyer pays shipping.

This is a OEM Big Block Crankshaft/Harmonic Balancer Bolt & Washer. It is original, not a china knockoff, and is in good condition. It came off of a 1969 440HP, but fits the 350,361,383,400,413,426w, and 440ci engines. $20.00. Local pickup, or buyer pays shipping.

This is an assorted lot of 1960's & 70's Engine Accessories Spacers and Long Bolts. They are original, not china knock offs, and are in good condition, but could use a clean up. $20.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Oil Pump Intermediate Shaft. It is original, not a china knockoff, and is in good condition. It fits the 350, 361, 383, 400, 413, 426, and 440 engines. $30.00. Local pickup, or buyer pays shipping.

1966/67 Mopar Hood Latch Striker Catch Bar w/Bolts. It is original, not a china knockoff, and is in good condition. It came off of a 1967 GTX, but may also work on other years and models. The bolts are not pictured, but are included. $25.00. Local pickup, or buyer pays shipping.

This is a OEM 1967 to 69 Big Block Throttle Return Spring Bracket. It is original, not a chinese repro. It may work on other years as well. It could use a cleanup, but is in good condition. $20.00. Local pickup, or buyer pays shipping. (This is for 4 barrel engines, not Six Packs)

This is a OEM Big Block Fuel Pump Push Rod. It is original, not a china knockoff, and in very good condition. It fits the 350, 361, 383, 400, 413, 426w, 440, & 426 Hemi Engines. $25.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Rear Main Seal Retainer with bolts. #2128895 It is original, not a china knockoff. It fits the 350, 361, 383, 400, 413, 426w, 440, and 426 Hemi BB engines. It is in good condition, with no cracks or stripped threads. Just needs a good cleanup. $30.00. Local pickup, or...

This is a OEM Big Block 727 Linkage Rod that goes from the bellcrank to the pressure lever. It is original, not a china knockoff. It came off of a 1968 GTX, but will also work on many other big block years and models. I don't know if it will work on small blocks. It is in good condition, but...

.050

This is a Pair Of Mopar Small Block Head Gaskets. I bought them for our 340 years ago and never used them. The 340 is gone, the head gaskets are still here. :) $30.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block 727 Kick Down Rod W/Clip. It is original, not a china knockoff. It came off of a 1968 GTX, but will also work on many other big block years and models. I don't know if it will work on small blocks. It is 13 3/4", and has the adjustable clip on the upper end. It is in...

This is a Fuel Neck Filler Tube Grommet. It is in like new condition. We bought it for our 1967 Belvedere years ago, but could not get it to fit. I believe they sent us the wrong one, so I'm not sure what Mopar this one is for. These are the measurements. 1.85"ID, 2.80"OD, and the groove is...

This is a Used OEM Aluminum Thermostat Housing #2780970. It is in good used condition, but could use a cleanup. $20.00. Local pickup, or buyer pays shipping.

This is a OEM Used Mopar Big Block Throttle Cable. It came off of a 1964 Dodge with a 426w 4bbl engine. It is 20 3/4" long. I believe it will also work on the 66 to 70 big block engines with a 2 or 4 bbl carb. The outer coating has a small wear spot as you can see in the pics, but it...

This is a OEM 1960's Mopar PCV Valve. It is original, not a china knockoff, and is in very good condition. It is correct for many Mopar engines up until 1970. $25.00. Local pickup or buyer pays shipping.

This is a 1966 to 1972 Big Block Left Side Motor Mount & Bracket. It is used, but in good condition. $25.00. Local pickup or buyer pays shipping.

This is a Small Block Timing Cover Gasket Set. It fits the LA 273 318 340 360. I don't know if it work on the newer 318/360 magnum engines. $20.00. Local pickup, or buyer pays shipping.

PM sent

Thank you. If anyone can use it, they can have it for shipping cost.

I can no longer remember what this came off of. If someone can accurately identify it, I would appreciate it.

This is a OEM 1974 Big Block Left Side Valve Cover. It came off of a 1974 440ci. It is original, not a china knockoff, and is in good condition. It was painted black at some point in it's life, and has some spots of surface rust inside, so it needs a good cleanup & repaint. The number on the...

This is a OEM 1966 to 73 727 Trans Throttle Pressure Lever with bolt, nut, and washer. It is original, not a china knockoff, and is in good condition. $20.00. Local pickup, or buyer pays shipping.

This is a Set Of 340 Intake Gaskets. They are the soft ones that work good with aluminum or cast iron intakes. They should also work fine on the LA360. $25.00. Local pickup, or buyer pays shipping.

This is a Holley 4bbl/6bbl Fuel Inlet Fitting. It came off of a damaged center 6 pack carb many years ago. It is used, and in decent driver condition with no damaged threads, but could use a cleanup. $20.00. Local pickup, or buyer pays shipping. (New ones are $51.70 at Summit) Holley 2300...

This is a OEM Mopar 4 Groove Crankshaft Pulley. It came off of a 1968 440ci engine with A/C & P/S, but I believe it will work on several different years and engines. It is in good condition. $35.00. Local pickup, or buyer pays shipping. (The six OEM attaching bolts are not pictured, but are...

This is an Old Automobile Cigar Lighter. I don't remember what it came out of, but you know it's old because it has "lighter" spelled out instead of an idiot icon of a cigarette burning. :-) $10.00. Local pickup, or buyer pays shipping

This is a Set Of 8 Used OEM 1968 440ci Rods & Pistons. The pistons are standard bore flattops. They are in good condition, just need a cleanup. Pistons #2843976 & Rods #LY 1851535. $150.00. Local pickup, or buyer pays shipping. They are about 50 pounds shipping weight.