This is a OEM Big Block Heater Hose Bracket. It came off of a
1968 440 with A/C, but may also work on other years and engines
with or without A/C. It is original, not a china knockoff, and
it is not new, but is in good used condition. $20.00. Local pickup,
or buyer pays shipping.
This is a OEM 1971 And Up SB Auto Trans Kickdown Lever. This came off
of a 1972 340, but I believe it was used on many small blocks in the
1970's. It may also have been used on some big blocks. $10.00. Local
pickup, or buyer pays shipping.
This is a OEM Aluminum Thermostat Housing #2780970. It
is in decent used condition, but could use a cleanup. $20.00.
Local pickup, or buyer pays shipping.
This is an Old School Chrome Push In Oil Filler Cap. It is
in decent condition, but could use a cleanup and polishing.
$10.00. Local pickup, or buyer pays shipping.
This is a OEM 1970 to 73 340 vacuum advance #3656066.
It works good, but could use a cleanup. $25.00. Local
pickup, or buyer pays shipping.
This is the correct distributor vacuum advance for the
following with 340 CID engine and electronic ignition:
1970-71 Plymouth Barracuda - 'Cuda - Duster -...
This is a Blue Bumper Jack with Tire Iron. I can no longer remember
for sure what car it came out of, but I think it was my 1967 GTX I
had many years ago. It is in good working condition, but could use
a cleanup and repaint. The jack, base, and tire iron are blue. I don't
have the hook for it...
This is a couple OEM Big Block Starter Dust Shields/Shim Plates. They
are originals, not china knockoffs. They are in good condition, but
could use a cleanup. $15.00 each, or $25.00 for both. Local pickup,
or buyer pays shipping.
This is a OEM Big Block Crankshaft/Harmonic Balancer Bolt & Washer.
It is original, not a china knockoff, and is in good condition. It
came off of a 1969 440HP, but fits the 350,361,383,400,413,426w,
and 440ci engines. $20.00. Local pickup, or buyer pays shipping.
This is an assorted lot of 1960's & 70's Engine Accessories Spacers and Long Bolts.
They are original, not china knock offs, and are in good condition, but could use a
clean up. $20.00. Local pickup, or buyer pays shipping.
This is a OEM Big Block Oil Pump Intermediate Shaft. It is original,
not a china knockoff, and is in good condition. It fits the 350, 361,
383, 400, 413, 426, and 440 engines. $30.00. Local pickup, or buyer
pays shipping.
1966/67 Mopar Hood Latch Striker Catch Bar w/Bolts.
It is original, not a china knockoff, and is in good
condition. It came off of a 1967 GTX, but may also work
on other years and models. The bolts are not pictured,
but are included. $25.00. Local pickup, or buyer pays
shipping.
This is a OEM 1967 to 69 Big Block Throttle Return Spring Bracket.
It is original, not a chinese repro. It may work on other years as
well. It could use a cleanup, but is in good condition. $20.00.
Local pickup, or buyer pays shipping.
(This is for 4 barrel engines, not Six Packs)
This is a OEM Big Block Fuel Pump Push Rod. It is original,
not a china knockoff, and in very good condition. It fits
the 350, 361, 383, 400, 413, 426w, 440, & 426 Hemi Engines.
$25.00. Local pickup, or buyer pays shipping.
This is a OEM Big Block Rear Main Seal Retainer with bolts. #2128895
It is original, not a china knockoff. It fits the 350, 361, 383, 400,
413, 426w, 440, and 426 Hemi BB engines. It is in good condition, with
no cracks or stripped threads. Just needs a good cleanup. $30.00. Local
pickup, or...
This is a OEM Big Block 727 Linkage Rod that goes from the
bellcrank to the pressure lever. It is original, not a
china knockoff. It came off of a 1968 GTX, but will also
work on many other big block years and models. I don't know
if it will work on small blocks. It is in good condition, but...
This is a Pair Of Mopar Small Block Head Gaskets. I bought
them for our 340 years ago and never used them. The 340 is
gone, the head gaskets are still here. :) $30.00. Local
pickup, or buyer pays shipping.
This is a OEM Big Block 727 Kick Down Rod W/Clip. It is original,
not a china knockoff. It came off of a 1968 GTX, but will also work
on many other big block years and models. I don't know if it will
work on small blocks. It is 13 3/4", and has the adjustable clip on
the upper end. It is in...
This is a Fuel Neck Filler Tube Grommet. It is in like
new condition. We bought it for our 1967 Belvedere years
ago, but could not get it to fit. I believe they sent us
the wrong one, so I'm not sure what Mopar this one is for.
These are the measurements. 1.85"ID, 2.80"OD, and the groove
is...
This is a Used OEM Aluminum Thermostat Housing #2780970. It
is in good used condition, but could use a cleanup. $20.00.
Local pickup, or buyer pays shipping.
This is a OEM Used Mopar Big Block Throttle Cable. It came off of
a 1964 Dodge with a 426w 4bbl engine. It is 20 3/4" long. I believe
it will also work on the 66 to 70 big block engines with a 2 or 4
bbl carb. The outer coating has a small wear spot as you can see
in the pics, but it...
This is a OEM 1960's Mopar PCV Valve. It is original, not a
china knockoff, and is in very good condition. It is correct
for many Mopar engines up until 1970. $25.00. Local pickup
or buyer pays shipping.
This is a Small Block Timing Cover Gasket Set. It fits the
LA 273 318 340 360. I don't know if it work on the newer
318/360 magnum engines. $20.00. Local pickup, or buyer pays
shipping.
This is a OEM 1974 Big Block Left Side Valve Cover. It came off
of a 1974 440ci. It is original, not a china knockoff, and is in
good condition. It was painted black at some point in it's life,
and has some spots of surface rust inside, so it needs a good cleanup
& repaint. The number on the...
This is a OEM 1966 to 73 727 Trans Throttle Pressure Lever
with bolt, nut, and washer. It is original, not a china
knockoff, and is in good condition. $20.00. Local pickup,
or buyer pays shipping.
This is a Set Of 340 Intake Gaskets. They are the soft ones
that work good with aluminum or cast iron intakes. They
should also work fine on the LA360. $25.00. Local pickup,
or buyer pays shipping.