Search results for query: *

  1. diymirage

    Rods in my Head, Part 2

    kinda like this?
  2. diymirage

    Any clutch fan options for 73 dart, /6?

    Wouldn't a hot ticket require even more cooling ?
  3. diymirage

    The mystery of the missing oil?

    Any chance when you drained it, you actually measured how much oil came out of the engine ? That would have been very helpful As for oil disappearing, I got a good story for you I just had my 360 rebuild and installed back into the car No oil leaks when parked, or idling, but it would...
  4. diymirage

    Exhaust Pros/Cons for Slant 6

    to take the advice of tony, would be akin to take the advice of Tim on tool time...both of which are shows made to generate ratings, and not necessarily to inform the masses keep that in mind and you'll be just fine
  5. diymirage

    will it hurt. whats your opinion

    Sure is, maybe I got my numbers wrong, but it's a slant 6 right ? They need quite a bit of help to get some compression going
  6. diymirage

    will it hurt. whats your opinion

    how far do you want to get into this engine ? if you rip it out, and deck it 0.250 will that be a double edged sword that gets rid of the ridge?
  7. diymirage

    Picking this up tomorrow

    Classy wheels I like it
  8. diymirage

    225 High Performance Engine / 904 Trans / 2 1/2 Inch Pypes exhaust - What Is It Worth

    I cant see it making more then 500 bucks Id imagine anyone looking to spend more then that on an engine will want, well, more engine If you want to make a little money on it, piecing it out would be the way to go
  9. diymirage

    Building a slant for torque

    I would have been one in '83
  10. diymirage

    Building a slant for torque

    the slanted installation of the slant six may be unique, but the engine itself, is not it was the base engine in how many cars? forklifts, generators, boats, combines, welders even irrigation pumps and even IF it were unique, try selling one there is a reason you dont see them often at car...
  11. diymirage

    Building a slant for torque

    its not so much about being pedantic as it i am just a guy fed up with people trying to change definitions of things
  12. diymirage

    Building a slant for torque

    no, it is not look at the top of the page...it clearly says "for A bodies only dot com" THAT is the forum we are in as you so poignantly pointed out, we are in the slant 6 section of the forum but that does not make this a slant six forum, any more than you being from Georgia makes the...
  13. diymirage

    Building a slant for torque

    actually, its not, but thanks for playing
  14. diymirage

    Building a slant for torque

    Just over 8 million slant sixes were produced during a span of over 2 decades...doesn't sound very unique to me
  15. diymirage

    Slant 6 MPG Upgrades?

    what are you willing to invest? lest say you go from averaging 20 to 25 and lets say you driver 25 miles to work now, you are putting 250 miles per week on the dart, thats 14000 miles per year at 20 MPG that is 700 gallons at 25 MPG that is 560 gallons so you'd be saving 140 gallons per...
  16. diymirage

    Where to buy carb

    i think several of our members offer that service, and woodruff is a sponsor on our forum, i would call them
  17. diymirage

    Making kickdown lever for carb

    sounds like a plan if that doenst work, you got my blessing to drop a 360 in
  18. diymirage

    Making kickdown lever for carb

    ok, how bout this...we tear the whole thing apart and pull out the throttle shaft we then remove this little spacer (circled in red) and replace it with one of these doohickeys Stromberg 97-Style Center Carb Throttle Shaft Arm | eBay put the whole thing back together done (some...
  19. diymirage

    Making kickdown lever for carb

    thats hotrodding for you see if these guys can help you out (if not, it may give you an idea on how to design it) Stromberg Linkage Kits Archives - Lucky's Speed Shop
  20. diymirage

    Making kickdown lever for carb

    going back to stock should only be a last resort
  21. diymirage

    Making kickdown lever for carb

    You can always put a manual valve body in that 904
  22. diymirage

    Oil filter relocation kit

    Mount the oil filter up high enough and it would all drain back into the engine, instead of on it (speaking of the hoses)
  23. diymirage

    To Turbo or Supercharge

    doesnt get much more different then this all kidding aside, i think a turbo would be the easiest to get her there...but imagine the looks you will get with that scoop popping out the hood in the odd place
  24. diymirage

    To Turbo or Supercharge

    400 hp is a healthy 360 Just saying
  25. diymirage

    Power Steering Belt

    Why not just measure it ? Take the slack out of the tensioner and run a piece of string around the pulleys Whatever length the string is, is the proper size belt
  26. diymirage

    71 slant 6 - air filter mount

    Slap some pics up
  27. diymirage

    71 slant 6 - air filter mount

    Try getting a hold of @EvanS He's got a slant he's looking to get rid off and might sell you the part (don't know if it fits, since his is a super 225, but you may want the whole intake aswell)
  28. diymirage

    water sending unit

    Or they'll say "Plymouth? Who makes that?"
  29. diymirage

    How did you fix your valve cover leak?

    But they make em for the 360... Sounds like the perfect excuse to do an engine swap
  30. diymirage

    Jeep 4.0 in 69 Barracuda

    I thought that was a mean thing to say to rusty...then I noticed you were talking to someone I have on ignore
Back
Top