Search results for query: *

And a huge challenge

My 69 Dart was bought, in 87' with a Hurst Tee handle. That was the first thing to go, I went with the stock ball. I have small handle, so the ball works better than the pistol grip for me.

Early version is as the one shown in the photo. The later version had the angled thermostat pad. Tom

Doesn't appear they offer a white, but the grey's look possible. Read an article about it and appears like/better than leather. I'll look into it ... many thx!

The wind chimes are just startin' to jingle outside. Weather geeks guess 45-50 mph gusts in nearby areas today. That's Spring weather, not June Gloom! :wtf: :lol:

I'm betting those would work great, BUT ... they are period matching/correct covers and we are aiming for the "restored" outcome with more modern material/look, which appears to be the issue in material sourcing. We are adding bolsters too for the same reason you mentioned.

Yep Crazy, but have at it. I went around the world 4 times one night.

If this helps ~ I built a 408 on a LA 360 with Eddy Magnum closed chamber heads (drilled for the LA pattern) with LS rockers (1.6 ratio) then port matched by Hughes to an AirGap. Good combo and easy.

That would be awesome

That's awesome man, I appreciate it greatly!

Sooo anyway.. I think I have the craziest idea yet… I think I’m gonna try and do One Lap of America next

No problem... i didn't even know frieberger sells shirts til you mentioned it

The point I need to make is that the reason Frieburger was upset with it is that people buying them off Amazon are wearing the cheap ones out stupid fast, or shrinking them on the first washing etc and trying to turn them into HIS website for exchange or return. That’s where the issue lies. See...

Numbers looked closer to Speedmaster heads to me. Especially on the 4.250 bore test size they used. Stub pipe jumped up the exhaust numbers too.

Got one new pair of American-made 7-inch round LED headlamps, Truck-Lite 37270C. Not my favourite 7" headlamp in the whole wide world, but completely credible, much better than sealed beams, DOT-certified, and very well built. They draw very little current (no relay harness needed; drop in, plug...

Performance World

Where did you get your Monroes? I'm pulling the KYB's off the 73 Dart and want something decent without spending the coin as I do on the Barracudas.

The cam bolts for the upper arm goes in one way? Because of that big round piece?

Chevy!!!!

Yeah.. i can't stand the guy.. i like fighters that don't act like complete assholes outside the ring.. plus the guy supposedly is worth millions but all his clothes look like he shops in the teen boys section..

I have 15x7 47/8 BS with 4.5 BC Satin finish and nice $375 Pair.

I agree, the plugs will tell you the health of your engine. Last year I changed my plugs (N-9Y) on my 69 340, manual, at around 70,000 miles and they were clean and tan, just a little wider jap. I do spend around one hour setting the dwell on it's dual point distributor.

If you are keeping the "2-barrel, stock cam", a 500 cfm carb will give good response and better mileage. If you think you may need to change carb jets, then get one with easily replaced jets. If it is an automatic, you probably won't use the secondaries very often. Are you going to give it an...

Promoters keep throwing money at him...

Evans Wiring builds great and affordable engine wiring harnesses. If what you want (particular kind of engine, ignition, etc) isn't listed, ping him and he'll build it.

ive seen the redneck version of those, but the idea is pretty awesome (of course, that one would STILL drip all over my sway bar) this is what i need

Super glue.

The stainless trim is easy to remove and refinish . The seat backs are metal with a vinyl covering which can also be recovered . You will probably see dents in the seat backs from years of use but just repair as any metal refinishing. Seat tracks from 68 can be made to fit the 67 seats. That...

I know I am a few days behind replying here . I am also building a 408 using a magnum block . I went with performance world bare castings (had the +.100 valves from a previous opps) And a set of speed master 1.5 shaft mount rockers and oil thru pushrods . The reason i went bare castings is i am...