Search results for query: *

70 & up Dart, rear bumper support at rear panel to frame

You should look into getting 5.9 magnum exhaust manifolds with a small section of tail pipe, flange & bolts. They will most likely flow better than stock 273 manifolds. you will have to trim a few inches off the lower steering column. this option will only work with manual steering. AS said...

Robert, you have them on the wrong sides.

They look ok, what I do is leave the brackets & mounts off the engine during install, then after trans mount bolts are started and left loose then I install brackets with mounts on driver's side 1st, then after everything is in position I tighten everything down.

Could also try a something like a mercury switch to deactivate the relay when braking.

They don't look like early A body to me.

Good to know, you answered 2 questions, what about the other 2?

Question: when you had the pan off cleaning and inspecting was the pan clean or clutch material inside and did you drain the T/converter and inspect for any debris, is it the same T/C used in last trans? When you filled it up how many qtrs. of aft did it take? If all was ok above it sounds like...

Double pumper, 4 gear, I see your having fun. Need more info if you want better mpg. You're smiling in the picture was that before or after you filled the tank with CA pricing.

Try pushing the door into the body and hold in, lock and unlock door with key then the inside lock knob, then try to open, if still no go it's time to remove the door panel to get into assembly and try to get released with a hook wire. Question how long since the paint job, I see overspray on...

Take your time, label your shelves, have an inventory sheet for what is on each shelf. have heavy items on lower shelves. I'm sure you will get plenty of ideas. Some items make you want to build a car for that part, It's part of the addiction, have fun.

John, like the old saying says, walk quietly and carry a Big Stick.

Nice driver, yes take it slow to get some good ideas from above for correct install. Question: What brand of front seats do you have and are they comfortable with all adjustments?

See if you have enough cap left below the crack to tap some threads and install a stud, oil pump bolt torque is what 35? if not your sol.

Other option that most people won't do today is cut open the inner fenders and buy used fenderwell headers at a less expensive than HP manifolds price. Now if you build it to breathe then choke it you will be unhappy. It's all about the combination of parts to work together & don't forget about...

Welcome to the Club of Cars, Parts & Future Projects addiction, your in good company.

Do you have the storage space, if not what will it cost to get space? Do you want to sell parts and spend time away from family or have them join in? Looks like a great stash of parts. if you purchase all have him include all shelving units. I'm realistic-cheap, I look for deals at 25-30% of...

Many moons ago on my 74 Duster I just unplugged the wires under the seat for the sensors and that stopped my buzzer, then I took out the bulb for the light.

BB A body looks like it was a fun ride, done the old fashion way.

Was the hood scoop and option or standard equipment for that model.

I think duct tape will hold it till 150 mph, make sure you use the name brand. :realcrazy:

Looks like it's time to play.

Good looking car, take a close look at the clutch pedal, looks bent to the left, look for play and cracking, next, gas pedal is not from 65 looks like later 60-70s, bring a flashlight, and you want to get under it to inspect for rust, hope it's clean and works for you to enjoy.

I worked in the service dept for a GM Dealer when that model 1st came out, great truck, just the rear brake pads were smoked by 10,000 miles and expensive, I told my customers to replace them every 8k miles.

Sometimes you just have to laugh it off or talk to yourself.:mad:

My factory sbp axle is 25 5/8 from end of axle to bearing adjuster mounting plate to housing.

Just Imagine when driving with the AC blowing cold on a Warm AZ. 118 deg day.

Your forgetting about the space added to the large bolt pattern axle flange possibly.

Price drop, 545.00

Price drop, 245.00