Search results for query: *

It's just amazing how things go together so well when you have the right parts. I stopped in at Roseville Moparts today and picked up the correct lower trans lever #2536270 I installed it no problem and the lower rod went on the lever and to the lower swivel just like it was made for it. LOL The...

Thank you for that info, Roseville is not that far from me. Based on what you are showing me here it tells me that the lever that I have on my trans right now is wrong and is probably why I can not get the rod connected correctly. Thanks Bob

Looking at this picture above and going from left to right, left being #1 right being #5 the lever that I have right now would be #5 and the way the keyway is it pushes the lever forward toward the front of the trans and mine is the longer one but it measures 3 1/2" long. Also the hole for the...

OK it has already been determined that I have the wrong swivel up top, a new and correct one has been ordered that is out of the way. The biggest problem that I am facing right now is the fact that even without any of the other kickdown rods connected I cannot connect the lower rod from the...

Now all I need is the length of the lower rod that connects to the trans lever if anyone has this or can measure their's. Thanks Bob

Thanks Glider for the offer but I just bought one off of eBay.

Thanks j I have everything in his picture except for the swivel which I just bought off of eBay. I did send him a message asking him to measure the length of the lower rod though to see if the one I have is the correct length, mine does look just like the one he has pictured same bends and all.

What about the top rod being 9 1/2" to the end of the threads? does that sound about right or not. I just bought the new swivel that was listed on eBay, one less part I need to find, most of the stuff that's in Gliders post looks the same as what I have but it's hard to tell just by the pictures.

I looked at his listing and the swivel does look like the ones on eBay. Is that the same one that you have or would you rather I bought one off of eBay instead of selling yours? It would probably be more in shipping from Canada to the US for me to buy your's.

The top rod to the carb is 9 1/2" to the end of the threads. Hey Kim will you search that eBay number also and see if that looks like the swivel that you have.

I did search eBay and it looks like the swivels are there for sale, the complete set-up for $299.00 looks like it is for a 2bbl with additional parts to convert to the 4bbl most of those parts I already have. Thanks

Yes the down rod is 13" without the snap on it.

I agree with you on the top swivel being wrong Kim it does not look anything like the one in the FSM to much hook for the carb rod. In the FSM it states that the adjustments are the same for the Valiant and Barracuda with the 273,318, and 340 but the picture it has is with a 2bbl carb I don't...

Syleng1 your setup is what I had on my 66 273/904 and it worked fine. This is a 68 340/727 and does not look anything like what you have. Thanks for the picture anyway. Bob

The pictures in the FSM look exactly like what I have but it does not get into lengths. Everything that I have looked at seems good but the only way I can connect the lower rod is if I move the kickdown lever on the trans all the way back and like I said it seems to be about 3" to long. Here are...

So I had my 68 Barracuda out for it's first ride in 40 years, not shifting correct no 3rd gear. I took a look at the kickdown rod set up that was included with all the parts when I bought it and it looks like the lower rod is to long. With it connected the lever on the trans is all the way back...

This is a little better picture, you can't see the 6 very good but you can see the 8 better.

I have the same part number TC cover that I have kept as a spare and it does have 68 stamped in the little circle to the right, I tried to get a legible picture of it but it is so small it won't show up and the one that's on my 340 right now has the same 68 stamped in the little circle also.

Ship it Gliderider06 I will send you a PM. Bob

I am looking for a nice set of black upper shoulder belts, just the belts. Are there any in this car? Thanks Bob

Hey Eddie sent you a P.M. Thanks Bob

I do not know how many of these clips there are to hold the stainless trim in place just below the rear window of the cargo area of my 68 barracuda fastback, I just know I don't have enough of them. One side has 6 and the other side only has 4 and there are a lot more holes than that. Does...

Does anyone have a nice black drivers side rear armrest with the ashtray for my 68 barracuda that they would like to trade for a nice passenger side? Here is the one I have for trade, there are no cracks or damage. Thanks Bob

You know after looking at how much the fastback trunk mats sell for on eBay and other sites, I think I will just cut this one to fit and be done with it. Thanks for the ad anyway FABO.

I picked this trunk mat up a few years ago at a swap meet and now that I am ready to install it in my 68 fastback I found out it is for the coupe or convertible. It is the heavy rubber one, and the box has a Year One sticker on it so it is not the factory original mat. It has a few small marks...

I did a little wet sanding and wheeling on the hood and roof today, very happy with the way it came out. I even had the chance to put a few parts on, the outside is almost done but still have interior work to do. Hoping to put some insurance on it soon and get it legalized. I miss my 66 but this...

I have found a wire and grommet that I can use, thanks anyway. Bob

If anyone has a parts car I am looking for the license light wire along with the grommet that hooks up to the license light itself and goes through the back panel to the trunk harness for my 68 barracuda. Mine was cut off right at the harness so if you can cut the wire right at the harness or...

All marker lights SOLD!!!

Yes they do.