Search results for query: *

  1. B

    [FOR SALE] 1965 commando barracuda part out

    No problem. Happy to help if I can.
  2. B

    [FOR SALE] 1965 commando barracuda part out

    And always the trans needs to be in neutral
  3. B

    [FOR SALE] 1965 commando barracuda part out

    Avaustin is correct in principle but if the suregrip is weak it may still rotate in the forward direction off the ground but not under load. This is why you leave one wheel on the ground. If it's holding you won't be able to turn the raised wheel. I think both parties would like to know...
  4. B

    [FOR SALE] 1965 commando barracuda part out

    Try both methods and report. Lol.
  5. B

    [FOR SALE] 1965 commando barracuda part out

    You forgot to mention to put the trans in neutral. Also this method doesn't allow you to know if the suregrip is working ? With one wheel on the ground in neutral you won't be able to rotate, thus you know it's working the way it should at least for now.
  6. B

    [FOR SALE] 1965 commando barracuda part out

    Jack up off the ground one rear wheel. With the trans in neutral you shouldn't be able to rotate the raised wheel. This is IF, it indeed is a suregrip
  7. B

    Where can I find an overflow cap?

    Maybe try covering the opening with a thin piece of cloth, maybe something like an old cotton handkerchief grandad used to have. Then screw on your cap and trim the excess off. Should tighten up enough until you find the correct lid.
  8. B

    Overheating on run stand

    I agree 100%
  9. B

    Overheating on run stand

    Inadequate
  10. B

    Overheating on run stand

    Steve I'm not suggesting that the fan is the sole problem here but first off you need to re-create the scenario of driving at say 60mph at roughly 3,000 rpm. You need lots of air flow. The rad your using maybe adequate as well. Again just my 2 cents. Good luck
  11. B

    One for our Canadian friends

    It was sold and like a lot of new owners they like to change the name maybe to distance or distinguish them from previous owners ???
  12. B

    Overheating on run stand

    Place a large box fan on high speed directly in front of the radiator to simulate driving down the road. The smallish fan in the video is at an angle and not only too small but only used for a short period. The fan blade on the water pump is only sufficient at idle speed when stopped. Just my...
  13. B

    Roof Skin 69 Dart

    Member ir3333 I believe has one. He's located in Sterling Ontario Canada and I can't imagine what Shipping would cost ??
  14. B

    Very unusual 1968 GT rad support stamp

    Yes as far as I know 68 doesn't have the vin # but the S.O.# stamped in several places including the rad support. And as well you could only get a 340 in a GTS in the dodge line up
  15. B

    [FOR SALE] Steering wheel $65

    I can see the horn button and the wheel but is the horn switch included and does it work ? Thanks.
  16. B

    [SOLD] Traded

    Thanks. I'll review
  17. B

    [SOLD] Traded

    Any other pictures. Maybe of the interior parts ? Is the numbers matching engine together or apart. Looking for finished car I presume ?
  18. B

    340 Block Numbers

    No problem.
  19. B

    340 Block Numbers

    So the first number 9 is the year 1969 model B represents Hamtramck assembly plant The last six digits are the numerical sequence on the assembly line. Whether it was a dart or Cuda I'm not knowledgeable enough to tell. Maybe someone else can help you there.
  20. B

    [WANTED] A body coat hooks

    Should be room now
  21. B

    [WANTED] A body coat hooks

    I'll clear some room so you can send your information if you wish
  22. B

    340 Block Numbers

    The Vin number just above the oil pan on the pass side might be a complete 13 digit or a partial Vin number. This number could help figure out exactly what vehicle your engine came out of. 1969 340's were only in darts and cudas but depending on the casting date could have found there way into...
  23. B

    340 Block Numbers

    No problem. Happy to help if I can.
  24. B

    [WANTED] A body coat hooks

    This is what I got. If you can use them they're yours.
  25. B

    [WANTED] A body coat hooks

    Are they the same as a 69 dart ?? If so I have a pair. I'll take a picture of what I got today and post
  26. B

    Old style crager wheels and tires fir my duster. Opinion needed

    Also the year of duster, cause those rims are large bolt pattern I believe
  27. B

    Old style crager wheels and tires fir my duster. Opinion needed

    It would help if we knew what kind/brand of disc brakes you have. Are they the kelsey hayes 4 piston calipers or some aftermarket ones like wildwood ??
  28. B

    Old style crager wheels and tires fir my duster. Opinion needed

    What's the manufacturer's date on those L60 tires ? I would think they're old as they haven't used the letter designation for quite some time if my memory serves me. The rally wheels should be fine.
Back
Top