Separate names with a comma.
ill take this
Thanks for the reply
Could be 1 of three things.
Ballist resistor. (Just happened to me)
Need a small block 4bbl throttle bracket
That Duster was built right! Wow
Both intakes are sold pending payment. Thank you for all the interest
Edelbrock Performer Plus nice small bump in lift and short duration. Good torque cam
Edelbrock Performer 318/360 intake
$125 shipped lower 48
Holley Street Dominator intake for 318/340/360 etc $135 shipped lower 48
Usually when you spin the convertor to seat it into the transmission it will click in 2 times I don’t think you have it fully into the...
I concur with Murray. Take it apart once and do it right. In the end you’ll be happier
It’s usually also cheaper to do it right once than wrong...
yes it is!
Wanted: Mopar Performance P4876850 Magnum intake throttle cable bracket
New or used
I do yes
I use white grease or the original Lubri-plate white grease based assembly lube You don’t want a dry grab to wreck the seal at start up
Both are hydraulic flat tappet not solid lifter mechanical
Thank you Oliver for your input. You seem to be very astute in these things. Can you tell how much it was used? Again I just acquired a batch of...
I’d cut the oil filter apart also
If you see metal debris then a bearing might be going. If clean change the spring or whole pump and start it...
Set of .030 273 pistons on original 273 rods
$50 + actual shipping lower 48273 timing cover. $25 +actual shipping
273 balancer. Perfect inner...
1) Edelbrock 600 with electric choke. $125 shipped lower 482) Edelbrock 600 w/o choke $115 shipped lower 48All linkage and adjustment screws...
Thank you Max Much appreciated!
Wanted: looking for a small block smaller sized solid lifter camshaft like a Comp 270S or Isky E4 nothing over 224 duration 470 lift New only...
Thank you for posting that! I had forgotten how, uhmmmm "interesting" those cars really were.... wow I had a friend in H.S. who had a Levi's...
Tried to Pm Your inbox is full
Would like to purchase the 500 carb
66fs thank you for feedback
Thank you That's what I remember as well just could'nt find it online
I know years ago they had the tube and peen kit to override that issue...