Separate names with a comma.
Check with Napa
You could change the backing plates
Should read low when cranking/start position and move to high when in the run position
Could be the lever broke or backed off from the servo to rear band in which case transmission would not have to come out. I have replaced them...
I will buy the lot. I have PayPal, never heard of Venmo
For what car?
Thank you for sharing your information. Have you heard of Steve Wann?
That’s good, did you take a picture of the driver’s side head? I am also interested in the intake casting numbers, both the type and date. So far...
Yes, those numbers are the casting type numbers. I want the date casting numbers which are on the intake runner next to the casting type numbers...
You are correct. I am looking for date casting numbers. My formula S was built Oct 4 1965, that car was built November 24 1965. Heads and intake...
That’s good, when you get a chance can you take a picture of the cylinder heads date codes? Thank you!
Not what I wanted to hear I am going to pass on this engine, l am sorry. Good luck .
Block date casting number is on the passenger side of the block behind the motor mount bosses. The head date casting numbers are under the valve...
Carb is off a 1966 440 engine, no good to me. Can you check the casting dates on the block and heads?
At the base of the carb under where the little hose connects, there’s a number stamped in the base plate. I can see part of it in one of your...
Can you take a picture of the carb tag or base of carb? Can you take a picture of the fender tag also? Thank you, if the numbers are what I want I...
Fresh build for NHRA stock eliminator.
Does anyone have any tips on modifying AFB for Drag Racing for Stock in NHRA?
Hi,I pulled the 360 last week and discovered that I might have a motor mount issue. Can you check these pics out and let me know what you think. I...
This is my 66 Formula S. I am building a 273 for NHRA. It is pictured with an IHRA Crate Motor 360/360 LA combination in it.
I will buy them and pick them up. Where are you in WV?
Engine available? Carb to oil pan and motor mounts? Not interested in exhaust manifolds if you want to sell to Marcus.
I have been owner since 1986. I use it to Drag race. It has won 2 national events and 2 divisional events.[ATTACH]
This shows images of my car at the track[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Thank you!Merry ChristmasMike Bolton
I got a 273 66' and it has original bearings. Rods are 001 oversized. Pistons have C stamped on 6 Pistons, a B on one and a D on the last one. The...
Sold? How much?
How much is shipping to 20678