Separate names with a comma.
I let my friends drive this one.. we have a lot of fun with it[ATTACH][ATTACH]
73 - converted to 93 Cummins, 5-speed
Started out >repairing rusted floor[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
Dodge Rampage- 440 tube chassis[ATTACH]
they bandaged it. instead of replacing the o-ring seal. on that pin
major floor surgery, 72 swinger, but I also run a metal trans shield[ATTACH][ATTACH][ATTACH]
Chris - stop and say Hi, next time... finally got the suspension dialed in. waiting on any track to open back up. wanting to run the 7.0 class...
don't know the thickness- look @ Summit pans
spring pressure could also be an issue, rather see the correct spring height/ pressure for the cam being run
both Cummins- 5 speed
Edit > forgot about the "Little Rampage" it's under cover, waiting for interior sheet metal work[ATTACH][ATTACH][ATTACH]
need to store my cars for the winter, looking for a good fitting cover for dart swingers
on my Satellite- the rear of the hood would bow up, @ speed letting air pass under the hood[ATTACH]
mine is a AAR/ Stinger drill a few extra holes. the base is used on dirt track cars[ATTACH][ATTACH]
Thanks JDMOPAR,, It's just a "Plain" shop... never big enough[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
Ha! Nice work. Those are pretty cool!Thanks
I cut an old rocker arm shaft in half, turn it around. Weld a pair of locking collars to a stand.
can be adjusted to many angles[ATTACH][ATTACH]
piston pic @ the bottom. looks like a carb blade screw imprint
need voltage on the blue wire to charge
JW bell cut the bell off on a lathe, for appearance[ATTACH][ATTACH]
last one I looked at was around $600.Note to anyone trying to take an od unit apart.. be SURE to have the proper tools, has a >>> 600lbs...
could go with a manual valve body for a 518
the out-put shafts are different diameters, a gas governor will not fit a diesel shaft, (to small)
also different years have different spline...
the governor housing and weights are larger > od. than a gasyou would need heaver/ stiffer springs in the shift valves.
I went the other...
small bock stroker[ATTACH]
dana narrowed to 51" flange to flange.
10" wheel- 5" back space,
275-60 x 15 ET pro.have the same set up on the 72 Dart= except it has 325-50 x...
"more Doors, " More Fun" Lol[ATTACH][ATTACH][ATTACH][ATTACH]
clean the ground strap, located on one of the mounting studs
have you check the gov pressure with a gauge ?
72 swinger-trunk mounted fuel cell
has been a very interesting project.
arrived April 24.just got back today....order parts and wait.
since the wheels are off > check all brakes,...