Separate names with a comma.
I got mine for my notchback from Cass at doctor diff. Have the box, forget which brand, leaning twords right stuff
I might have extra door hardware. I’m on my way back to the shop now. Have an extra set. Just have to confirm they are 67’s. What is different...
Is the SU carb the one on a Triumph Spitfire? It was like a snowmobile or motorcycle carb, with the throttle slide and an oil reservoir that the...
It’s funny, the ad didn’t say a word about rotten front frame rails, floor, trunk wheel, rockers, rear pan, kmember, quarters, fenders, inner...
Scrap that, I had it backwards. I might have a 318 balancer if you need it. From a 74 teener. Pulleys, I don’t know. I had a similar problem on a...
Ok, this is what I would do. Take the timing cover, balancer, pulleys, water pump, alt bracket and whatever else from the 318. Buy the 9$ part...
I won’t take my notch very far, I think I figured 4.5 MPG on a 12 gal well cell. I’m currently building a fb with a magnum 360, I’m hoping a...
[ATTACH]
we can try @7demon2 but the post is from ‘07. Maybe the source of the original article may be where I would start diggin
They didn’t offer it in 72. 70-71
I would start by adjusting the valve clearance and advancing the timing. And as for the slant turbo being a messy sitch…[ATTACH]
High Impact Color Production % #'sYour answer lies within
There was 64 D100 the had in the Quiet Place 2. It was for sale on the way to the set. They rented it for like 2k and the guy still wanted way too...
The movie generally has a working title and is different when released. I am a set carpenter for IATSE 52. Usually there are 2 or 3 similar cars,...
But where is the fun in that?
I also opted for stainless tubing and carriage bolts. [ATTACH]
I will have to check the shop, but I ordered two of the same side, or received two of the same side. Not sure which side, but definitely lower.
I thought piston knock was only with forged pistons. Let it warm up before you mash the throttle. Adjustable rockers? I had a noise that I thought...
I wouldn’t use sand paper, my buddy at the machine shop says even scotch brite pads will leave grit in the babbit. I sharpened the end of a 3...
Jeep rims on valiant there was a lip for the smaller hub, I used die grinder to remove the lip, and it’s the right size. The tires on front are...
Big boat, I probably want two
I’m going to bet the master is fine, probably needs an inline prop valve or a disc/drum distribution block
I might have one from a 73 valiant. I’ll have to see if the car was AC
440 source offers a pass side inlet water pump housing
Getting closer on the vega, and did a rack and pinion and disc conversion on the panel, amongst other things[ATTACH] [ATTACH]
I read 90inch lbs. so around 7.5-8ft lb. While rotating the hub. Then back off, then finger.
To add to my previous post, I take two pieces of 2x2 from door side rear wheel to door side of front wheel and tack them to the rockers, then two...
I used the k member as a guide, and welded a piece of 2x2 box tubing to the torsion bar x-member where the frame connects, the rails slide over...
I tried it in my 440, the 93 proved better. 91 wouldnt cut it
Brewers for sure! They ship fast and they have pretty much everything you would need.
