Separate names with a comma.
I should note that I Still have a slant 6 pressure plate we modified with upgraded fingers and springs. Going to hold on to it in case I get...
Had the same issues running the Mcloud. I had issues with the throw out bearing/ Forks hitting the disk when the clutch was depressed. Had to...
There's a kit you can get with everything you need to refurbish the torque arm assembly. Brewer and Mancini carries it.
Infamous Inland shifter
I went with a billet retainer
If you can afford it Long makes an excellant V gate, about $600 or so. Go to the Jerico site for info.
What brand vertigate?
I know you have to weld a bead around the base to reniforce it. I have one laying around but for the life of me I can't figure why mine broke from...
I can't understand how it broke. The motor has never bven fired. All we did was rotate the crank to gain access to the pressure plate bolts. I...
The snout of the bearing retainer on my 4 speed broke off clean at the base, I noticed it when I was trying to push the clutch fork back to the...
Good quality parts
I sent an e-mail to Brewers last week about using the later 340 bell in an early A body. This was their reply.Bellhousing Ballstud brkt...
I just picked up an 833OD today that has the bearing retainer machined down to accept the earlier bell housing register
I just received a factory replacement from Brewers. $125 incl core charge. I already had the handle and rods
I have a factory shifter out of a 74-75 Dart/Duster that I converted to a bolt on stick. i'm not going to use it in that I bought a new comp +...
