Separate names with a comma.
Caddyshack is one I've seen 10 times and can see it 20 more.
Rodney Dangerfield, one of the funniest actor/ comedians ever. One of his best lines, " I tell ya, my wife's cooking is so bad, the fly's are...
Don't know what their excuse will be Small Block Chevy uses the same EIIEEIIE arrangement? Which is usually the excuse they use.
Fords have a unique number system, most V8's are 1,2,3,4 on the passenger side and 5,6,7,8 on the drivers.
even on passenger side, odd on drivers side.
Then you should have the pistons swapped to the correct rod arrangement. It is possible to swap holes with rod/piston assemblies on the same side....
If you swap 1 with 3, 5 with 7, 3 with 1, 7 with 5. The fly cuts will be right. Same with the even numbers.
No because the rods will be wrong. Valve arrangement should be E I I E E I I E. Hell you paid the machinist, Make do it right.
Piston are installed wrong. Exhaust fly cuts and intake fly cuts are in the wrong place.
Sorry wrong thread.
Welcome from the DEEP south.
Cool, I'll be in the used parts vendor area.
Yup I'll be there.
Welcome from Plant City Fl. Nice looking Mopar there.
Welcome, Enjoy the great people here.
Lots of knowledge and good people here. Welcome
You came to the right place. A lot of knowledge hangs out here.
Makes more sense if it were a 66. A28 is a October 28 build date, 31 is 273 2bl, the 3 is 4 speed. Not sure what the second 5 is for.
Welcome, what issues are you having with your VIN and fender tag. What year Dart do you have?
Welcome from Plant City Fl.
Welcome to THE A-body site. Is that a 70 ? Or 72 With a 73 K-member? Or a 73 with 72 Doors? Which ever, nice start!
Years ago most cars especially compact came without A/C, dealer installed A/C was common on a lot of these cars. Also the York compressor is a tip...
Welcome from Plant City Fl. Lets see some pictures.
Don't under estimate the 8 1/4. I beat on my 360 Dart and I haven't had an issue.
Welcome, any relation to inkjunkie? Just kidding.
Welcome, you've come to the right place!
Welcome. Plant City Fl. here.
I can save you all that work. Add another 100 cu.in. done.
Welcome, but I have to ask , why are you so concerned with removing weight off such a nice looking car? Did I read correct that you removed the...