Separate names with a comma.
I never thought I would say this, but I found something that works better......and not by "just a little bit". SeaFoam Deep Creep.
Then keep beatin on it, or come in from the other side with a length of pipe and knock it out that way.
We were kiddin about the C clips, but it's not a c clip rear end is it?
Well, if he gets a big enough slide hammer, I guess he might break the buttons off the axles. LOL
I was gonna ask that hours ago, but I just couldn't. LOL
Seein as I never have had a lot of money, I have had to find alternative ways. Although now I do have a slide hammer.
That bad boy will get it out then. You get that chain on there and hang that sledge in there and give it a few yanks. You best not be standin in...
If your arm isn't enough, hang the biggest ball peen hammer in the chain and yank on it with that.
get a length of chain and attach each end to a lug nut and snatch it out.
Now it's time for the burnout video.
Tranny pics need to be posted in the blue room. We might have children watchin. lol
The transmission downshifts two ways. Normally when coming to a stop and when the pedal is depressed. It might have the part throttle downshift...
Jamb the gas pedal to the floor. Without it running, of course. Get under the car and check where in its travel the kickdown lever is on the...
I gotta say, I watched the video and I liked how it shifts. I would have let it alone. lol
Seriously? Two nuts in the center of the crossmember hold the transmission mount. 4 bolts hold the crossmember in. Put a jack under the...
My crystal ball fell off the table and broke. Can you post some pictures please?
If you improved it any at all it has to be VERY close or spot on. I'd run it. I would have run it like it was......but it sounds like you got it...
Yeah I got it but it's incorrect terminology. It's either too deep, too shallow or just right.Wait......are we still talkin about gears here? lol
Looks "high"? WTH does that even mean? Here's correct terminology. That pattern IMO is dead nuts on as far as being on center on the ring gear...
Any kit with Borg Warner clutches.
Looks to me like that plastic bushing where the linkage comes through the bracket is in poor shape as well. Grab the shaft and see if you can make...
You bought transmission parts from Rock Auto?
I prefer the brass screen type filters. They flow much greater and do not stop up. JMO.
Just JB Weld it. It'll be fine.
Yes, they will.
I've gotten a few things from him in the past. Always top notch. Got what I needed very quickly.
Preach on, brother. They ain't listenin.
Correct. Trick Shift says right on the back label that it complies with Type F specs. That's all it is. Type F.