Separate names with a comma.
As far as I can remember. I’m pretty dam sure it’s a MP part. It is with all my other Mopar Performance stuff from the 90s. I have fender...
Don’t know the part# offhand. I believe it’s the 1/4 ohm if I am remembering right. Does the bracke look like something u can use? Kim
Pics. Here is the bracket.Dont remember if there ever was a bolt. The resistor is out at my storage, will likely go out there later in the week....
Doesn’t look like they will fit in the headlight bucket. Could maybe cut it out bigger. Kim
I would contact SlantSix Dan for a headlight recommendation and cracked back for a relay kit. Then u will have the best of both worlds. Kim
I think I have a mp bracket with the sleeve to go around the coil if I’m remembering right. Is that what ur looking for. Bought it in the mid 90s. Kim
It’s not a big deal to pull the dash out. Kim
Great, anything electrical can be a real pain to diagnose. Kim
This 1 here is adjustable and what he needs. plus the cap. Kim[ATTACH][ATTACH][ATTACH]
If I remember right I thought mine looks like a Chevy cap from an old point type distributor.the rotor is sure a Chevy style. But I could be...
Do u have a 1 wire alt? Is it charging properly now?
Have u checked to see if the oil pressure wire under the hood is maybe touching something metal and causing the gauge to fluctuate Kim
I run the chrome box for years. Now msd. Kim
R ur brackets for an aluminum pump or cast iron? What pump do u have? What year brackets and what year car? Kim
Well rusty y don’t u tell us all about it. Kim
I have found the regulator plug to be the culprit Kim
Did u check the fuses. Does the indicator light up when u try to signal. Kim
Thanks for the info. Kim
Yes that box takes their recommended coil and ballast resistor. It is not supposed to be run for more than 1/2 hour at a time. I would t use it on...
Is it the chrome box from the mp kit if so they have a recommended coil and ballast resistor. Kim
Thanks Del, maybe Rob will chime in. Kim
Hi there, installing a 1 wire alt on my race car. 74 duster factory wiring deleted. E fuel pump, E water pump, E 16 in fan, MSD ign with 7AL box....
Go back to the dealer and order another set use what u need , then return the short set. Kim. U need 2 sets to make 1 lol
Thanks Ray. I like the fact it's a 1 wire alt. Kim
who here runs this alt...........can u use the factory big block mounts.....or do u know what mounts I need...do I need to install a relay at the...
More than 60. Is the regulator gone bonkers and full fielding the alt. Kim
..............change the ballast resistor..........kim....
Do u have a clogged belt as in cuffs inside if so there garbage. If ur battery is weak replace it. Kim
Ur battery is the culprit Kim
............With ur dual ballast resistor u need a 5 pin box.........kim.........4 pin boxes use a single ballast........