Separate names with a comma.
Awesome car, I love the patina!
You should keep the shims under the valve springs, you don't want to run valve springs without them on aluminum heads.
???
This whole post made my head hurt! Damn I'm glad I went with a lowly TF727 in my swap!:)
I wasn't aware of that! I used a TF727 with the starter on the left on my swap. Since the engine is offset in the engine bay there's no...
Why are you mounting the starter on the right side? Most Mopar apps have the starter on the left side. That could be your problem.
I'm looking forward to following your build. Saving for your first car from kindergarten on was really amazing, you are a true car guy for...
I love how this build is playing out, it's going to be an awesome car when it's done!:thumbsup:
We had the take home units too. I definitely took care of mine but I couldn't say the same for others, it could be hit or miss. I was the firearms...
Mena ARKANSAS, not Arizona.
I'm a retired police officer, and I agree with what others here have said, the police car engine is not the best choice. They are right in that...
Hey, if you're not driving it like you stole it, you're not having fun!!! Sorry for your loss, but I'll bet it was fun while it lasted!:thumbsup:
I won't get in a "pissing match" with you over which one is better either, I have no experience with either one! From a "budget standpoint"...
Until you factor in a Ram ECM and the cost of having it unlocked, and then the tuner.
I"ll take $200 for it and the drum brakes. It's a bare housing, no differential or axles. All of the studs are there and in good shape. If you're...
Exact same thing here, 04 5.7 in my Cuda for about 14 years and no problems whatsoever. I did put a 6.1 cam in it and changed all the valve...
I have one in New Mexico with 10.5" brake hardware.
Nope, just ignore him. Don't feed the trolls! As long as he keeps getting reactions, he will keep spewing his garbage.
But AWESOME!:thumbsup:
Still here spewing all your negativity I see.
Yeah, we get it, you're not a G3 fanboy! my question is, if you hate them so much, why are you even posting in this section other than to tell...
It may be the angle of the photo, but it looks to me like you have the engine sitting a lot lower than stock.
What did you have to do to move the engine forward? Did it give you enough room to get the trans up where it should be?
Have you tried putting a floor jack under the trans and raising it? The rear of that intake should move forward when the trans is raised.
At .080 there's not much left. I think I will pass on them. Thanks for the responses though.
That would be great! I know they only have 6/32 tread depth when new as opposed to 11/32 for most street tires. If you can, stick a penny in the...
I tried to message you about the tires but it said your inbox was full. If they are still available I am interested in buying them.
The OC manifold is 4.85". I just went out and measured my MP manifold and it's 4.00" so you're looking at a little over 3/4" taller.I'm running...
Here's a couple of places that list the MP intake for a little less;Mopar Performance Single Plane Intake Manifold - P4510582ABP4510581AB -...
Moparts Racing is showing the Mopar Performance manifolds for $1025 but I would check to see if they have them in stock.Mopar Performance Parts...
