Separate names with a comma.
Spark plugs are hard to read due to lack of driving time, but that's OK we can work with what we got here. I dont like what I see. Plugs look...
"Surges" implies a fluctuation in engine rpm. I'll stand by the pump relief valve opening and closing. If you had a bad ground the other gauges...
Is the engine rpm jumping around in sync with the oil pressure?
That could be the oil pump pressure relief valve opening and closing which would calm down with some heat in the oil. Pull the oil filter and cut...
Agreed Even the change to the KB pistons would require a rebalance of the rotating assembly. IMO none of that will cause that knocking in the...
The noise in the second video is severe. I seriously doubt that the engine is the cause. Something is not right almost sounds like a loose...
I dont know what ignition you are running but, I killed a new MSD box pulling plug wires.
Strange you dont see alot drill holes in the crank counter weights. I only see one in the pic's. Most balanced crankshafts will have material...
Hey, I think that may be my 2nd cousin. Always wondered what happened to him. Personally myself I dont shop at Walmart or Sam's they are to...
That car is way too cool! What model is that? Cant say I have seen it before
Trade in those Turbo muffs for some straight pass thru mufflers and you will see a noticeable increase in HP.
Just watched an Engine Masters episode where they tested mufflers and the Turbo Muff's were the worst out of all tested for power loss on the dyno.
The color looks better still a bit lean i'd say. Timing should be on at 34* Need more time on the plugs to make accurate call. I assume no vacuum...
That plug is lean Heat range looks good Looks like the timing may be a bit retarded. This should help ya figure it out FBO Ignition - Home of the...
Those afr numbers are very lean for gasoline Can you post some closeup pic's of the plugs What are you using for fuel?
That is a very health cam for the street. Not surprising you are having idle quality issues. Refresh my memory, Ayou or stick tranny? Which...
New lower $price $175 plus the ride
If the heads were stored off the engine as shown in your pic's I would not hesitate to reuse the springs. I would be alot more concerned if some...
NEW LOWER PRICE $200 plus the ride
Edelbrock Performer intake manifold recently blasted and cleaned up. This is a great street manifold for under hood clearance applications....
Prayers sent for a full recovery.
Really, how long did the cam last? Not trying to be funny, years back I tried solid flat tappets on a hyd grind and within 100 miles it flatten...
Thanks for the pic's way too cool. I love Barracuda's to mine is a 67
You can not run a solid flat tappet on a hydraulic flat tappet cam grind. You may be able to run a solid roller tappet on a hydraulic roller cam...
Bewy we have a saying here in the states "Ya can't fix stupid". Just hit ignore Happy motoring
If you plan on keeping it the first thing you need to do is run a compression test on all 8 cylinders. Post the numbers here that will give us an...
Zap glue, its the best I like the Zap a Gap its not so runny And yes they have accelerator Amazon.com : zap it glue
Not trying to be funny, but can you get your money back? You were sold that car under false pretenses. That's not cool in any book.
When is dragweek 2022?
First do not rely on the internet for information on concrete. Pick out the best concrete plant in your area and go there and talk to them about...
