Separate names with a comma.
Thanks I will try couple things like carb and maybe my 14" bald street tire for more gear. Just looking for something i missed.
Running 275 60rs nitto drag radials seem to be hooking up when I drop them down to 18lbs. Trap rpm about 5,700
34 total advanced . Do you think that the petronix would hold it back some ? Yeah I was thinking mid 11's might the rockers a little tight they...
I'm not a racer either , just go to the track about twice a year for fun . Its a 800 afb . 60ft around 1.7 I know not good but my converter is...
I thought so too. It has ported eddies, rpm intake ,voodoo retro fit hyd roller dur 231/239 .535/.550 hughes 1.6 rollers , cheap headmans 3.91...
Right now I have a edelbrock 800 cfm on with the best of 12.2 @111 in a 67 barracuda . Just want to see if i put a race carb on would it get in...
How much will a race carb help on the track vs. street carb?
Any retro roller hyd lifters that drop in with rpm aluminum heads still on That work without grinding ?
If you had it out then could be 180 off.
dist 180 off ?
I think i'm going back to 3.23 gears cause it just sucks the gas with 3.91
I found some tow hooks in the garage from the jeep. We should weld them on your k-member.
What would be a good carb for a stroker?
To make it fair I will put a throttle stop on.
Maybe you will need a tow from the cuda this year?
My best with with a stock 360 with low compression dished pistons and 3.91 gears is 13.4 at 98 mph . 408 this summer!
Better fix that cracked flexplate .
The 408 will slay you. You can't win with that wimpy 360. chump.