Separate names with a comma.
Hand adjust the star wheel on the bottom til the drum will just slide on. After that I install two lugs to hold the drum tight to the axle. Then...
11x2 and 11x2 1/2 are common sizes.
10x 1 3/4 Means you have a original small bolt pattern A-body 8 3/4? If yes than no you can't change brake size, not with the original SB axles....
Long shoe to the rear ,short to the front. Very common practice.
When air didn't work, I would get a piece of wood like a 2x6, lay it on the ground, take the caliper with the piston(s) facing down( the way they...
If you look at the last picture on the pedals I have for sale, you will see how the brake light switch and bracket mount.
[FOR SALE] - 61-66 OR...
Check the depth of both holes when you get the rods out. If they are the same and the new one will hold the old rod in with a o-ring you can.
Rod comes out of the original. It has a rubber o ring that is holding it in. The Wilwood rod should be removable. Can't tell how by the picture.
I didn't know that either. Thanks
I just looked on Rock Auto, they say yes these will fit a 1965 Dart rear with 10" brakes.
Not sure, you'll have to ask FABOpedia.
Thanks, you guys are better than Wikipedia, your like FABOpedia!
Damn I looked there and didn't see them. I'll look again. Thanks
Ok next question, do you know who sells new ones.
Did a 67 273 Dart GT with a 7 1/4" SBP, ever come from the factory with 10" rear brake drums?
Well I can tell you in 63 years,64 tomorrow, I have never encountered what you are describing.
Check out this old FABO post, there is a good picture that shows where they go. Post#10
What are these for - '73 disc brake :
I have the same booster set up in my 69 Dart with a 360 and a Hughes HEH2328AL. Brakes have always worked great. Only thing I see different is I'm...
This is the OTC kit I bought and works great for brake lines.
OTC Tools 6502: Master Brake Flaring Tool Kit Single, Double And Bubble Flares...
Rear drum brakes? They may need adjusting.
If you were closer I would turn them for you. I have a Amco 4000 brake lath with all the tooling.
The place to start is jack the car up on jack stands. Get someone else to apply the brakes while you attempt to turn each wheel by hand.
With the cam that is in my Dart, the best I can so is 12" vacuum. But that has always been enough to operate my power brakes. Only difference is I...
Problem may be rear shoes wet from brake fluid leak or rear end 90w soaking them. That will cause the rear to lock up. You may want to look at...
That is also a possibility. Worked on a 62 T-bird that would do just that.Crack the single brake line at the MC and car would roll again.
Check the hydraulic hose from the rear end to the frame. They are known to collapse internally, they will let pressure in but not release. crack...
I will let him know and see if he is interested. Thanks
Are they B-body spindles?
Ok, I think we figured out he has 73 C-body spindles. Or the 74-78 C-body. Thanks myduster360 for all your help.
Oh and the disc spindle BJ's are longer overall also.