Separate names with a comma.
Oh yea, no problem as long as your axle is stock width.
A small oval head machine screw and nut works well.
Just peen the end of the screw down so it doesn't come loose and fall down in the motor.
[ATTACH]If this is what you are looking for, I find them laying around in the wrecking yard.
In fact I got one that looked brand new, though I...
Since I got my paint done finally, I went back to work on my LED outside lighting.
The back lights have had the center part of the lenses cut out...
If you have stock deck height and pistons you should be ok then.
If the cam itself has 507/533 and then using a 1.6 rocker, then yes I would be concerned.
The spring retainers could even hit the stem seals or...
Sometimes the squirrel wins, sometimes the feeder wins.[ATTACH]
That noise it too erratic for a rod knock or anything else inside the motor.
I also vote converter bolts or a cracked flex plate.
Shoot, you could have that in there and running by dinner time.
That's so you don't get sucked out the window at the top end.:lol:
He can but might need that device that matches the fuel sender to the the gauge ohms.
Meter Match I think it's called.They are high pressure...
I added to my post a little just so you know.:D
I'm doing fine, just busy on the cars, house, yard and everything else.
Sometimes it feels like...
Since plenum and runner volume have all kinds of RPM range applications we have to realize that the intake affects everything to do with HP, TQ as...
Never done exactly what you are asking, but there isn't a reason in the world that wouldn't work as long as the pump unit is submerged.
When I was a kid I found that if I accidentally flushed my watch I could beat it to the tank and catch it coming out of the pipe inside the tank.:D
For the same reason my old Fiat lights and gauges were whacked out until I drove it again for a bit.
Crappy connections, and I totally agree that...
That is a question like what kind of oil is best.
Most racers use manifold vacuum. (if advance is not locked out)
The BIG difference mechanically...
The safety switch can leak between the metal section and the crimped on part.
There is a pin in the back of the main case between the main case...
Doesn't look broken to me, but an unused terminal for the application.
Note how the other terminals have a little tab that goes down into the...
Try this Google search result.
elvis marie shuffle dance - YouTube
No not at all, as I am used to your caps and why it happens.:D
Physically find and verify TDC and remark your balancer on the drivers side.
What color is that "dark cloud"?
Blue is oil, and black is too much fuel.
My youngest Son took the passenger foot pegs off his bike so he had an excuse to not take anybody on the bike with him.:D
Thank you, but I think it might be muscle memory.:D
I was a mechanic and/or shop Foreman for most of my life.
Just switched to computer service 20...
Yes, outside in my gravel and dirt back yard.
It takes a specific type of weather.:D[ATTACH]
You mean like Pennzoil being a high quality oil that racers run?:lol:
Sounds like the ignition switch, but it could be your wiring to or from it including the bulkhead connector.
If it cranks but doesn't start your...
I am another vote for just filling the holes with fiberglass and leaving the rest alone.
Not necessarily because of the lead, but because it soooo...
I can answer that question with a short version story of one of our computer service customers.
Caller told her they would deposit 3k in her bank...