Separate names with a comma.
I have found a car that a friend of mine is interested in. The car has a black California license plate. I'm looking to get the information about...
I might have a kit. Let me look and I get back to you.
Funny, searching for assembly line oil filter took me over 10 years for my other project. Yesterday a new assembly line oil filter showed up. This...
Yesterday I was able to take the convertible for a 10 mile trip. Can wait until next summer. But I was able to get a picture of the two of them....
64 to 66 I know it's just one spring. Just as 65 Dartman said. Not sure about 63 but would assume one spring.
Nice it ended up with an enthusiast!
Nope! See my previous post #533Oh, I thought he ment on my car! Sorry Don!
When you assemble a car with NOS stuff you get a result like this. Actually the pipe over th rear end is from Accurate it works great.[ATTACH]
What is that electric stuff on the kick panel ?BillIt's the relays for the power tailgate window!
I bought them on Ebay from a company that have them date coded. (Quarter that is)
Thanks TMM! Now she is finally running.
Next is to mount the datecoded exhaust system![ATTACH][ATTACH][ATTACH][ATTACH]
Your car looks great Bill! I'm sure you will work out all the bugs on it!
Frond end bolts and nuts tightened, front alignment adjusted, cotter pins mounted, shocks tightened, all vacuum lines hooked up. I even found an...
Looking for the clips that holds the accelerator wire on the inside of the firewall?[ATTACH]
I might have. I'll check tomorrow.
Who was the supplier of the vinyl roof?
I'm searching for Offenhauser 1x4 and 2x4 bbl intake manifolds for early style 273. I'm looking for the early style #5489 for one single four...
Turned out great. How about a 3 gallon jug in the suitcase next year? Just kidding Don! Is it expensive stuff?
It's 2 on the outside and one the inside seatback side.
So after using the front seat from my convertible this summer it was time to put them where they bolonged, in the convertible. Due to that...
Not sure, I haven't spoke to him for a while either. I know he was home from work due to too much work, stressed out!
This electrical check vent ok .
BUT, when I swich the key to ignition the wipers come on. If I ground the outcome prong on the turn signal relay...
Thanks Toolman, then we have it all figured out! Amazing group! There is always something new to learn too.
Ops, right! Sorry!
They were painted semi gloss black without stamped letters in white or yellow. They was stamped in the metal at the bottom on the shocks.
I totally agree with you Toolman! Between the place for each ignition wire you can see that square hole for the insulator. But wasn't those...
Next step is done. Interior completed so electrical check will start tomorrow.[ATTACH]
I thi k 67s are different. You have a small square hole in between the loops. That's where the insulators hook up.
Toolman! I stand corrected. I thought the clips for the wiring harness was the same on 65 and 66 but you are right. Are the ignition cable holder...