Search results for query: *

My '70 Dart has brand new stock steering and suspension parts. I set the ride height and max'd the castor and camber (one cam in and one out) and am now doing an alignment. I had to dial back the camber from just over 1 degree to get back to 1/2 degree. Does this seem normal? I haven't...

I bought a Tuff wheel adaptor only to find that it doesn't have a master spline. I sold it to someone who tried it on a 4wd non tilt column and it didn't fit so I took it back. It looks the same and dimensionally seems the same as my repro Tuff adaptor that fits my '70 Dart with exception of...

I'm trying to reassemble my '70 Dart and everything seems to be a problem. Today I installed the steering column only to see that the shaft is about 2" too short as the coupling doesn't get close to the steering box shaft (I pulled the coupling down)....:BangHead: . This is the same column...

I learned something new today while I was trying to educate myself more on alignment as I have always left this to others. I found this video. It looks like he sets the upper control arms for max caster and then shims the lower ball joint to get his camber: I thought some discussion might be...

I bought this pitman arm last year and went to install it today. I can get the nut flush with the shaft using an impact but that is it. It looks like it should go on further. Run it or scrap it? Its a Mevotech piece...supposedly the better one. Rockauto also lists Delphi and Dorman. Its a...

I'm looking at buying a set of these to replace my dead springs (close and slightly used). Anybody know what these are exactly? I know stock 340 springs are 6 leaf. I wouldn't mind a 1 inch lift but I don't want anything that rides like a truck. My understanding is that the 3400081 is not a...