Separate names with a comma.
No rush, it's always there for you when you are ready for it. Besides, the more you do the more it costs, sure noticing it with this hemi...
I installed a Bosch type relay to power the Ford type solenoid and used the Neutral safety switch for ground.
This ain't pretty (diaghram)....
There's 2 5/16" studs on the bracket, through the plate and nuts on the rear. The adjustment arm pivots off of the frame.Yeah, my old...
Been keeping busy on the Dart. Waiting for a parts sheet to show up, also trying to find actual build date on this KB block, waiting for KB to...
I was going to put a stripe on too. I also decided to leave it as is until whenever.
Hoping this isn't needed but the good thing is I won't have to invent it now if I do, thanks!!!
No extra pedal needed, got my old 67 here with 3 pedals and that's enough!
Jet, who sells this bracket.
Yes it does. It contours to the vertical raised firewall shape.
Good info Denny. Yes I'm working with Tim @ FHO on a parts supply. I've offset the MC but only over, not upward. Funny, just 2 days ago I...
Yes, They're 1/2" cross bolts. Head stud thread is also 1/2", external oil pick up only. A pretty nice piece.
Dug the KB out of the crate today, one very nice piece.[ATTACH]A practise run. Think it needs to just stay natural aluminum, no paint....
This is a terrific job and going to be one of the best out there.
Sorry, but if you blow up that pic you will see there are no burn marks, those are shadows of dents from the lip being roughly rolled with a...
I found that when I was doing mine, the original lower body line where it changes direction and goes up over the wheel well lip, both front...
A Hurst Auto Stick II. Perfect for being period correct in the Dart.
It was mated to the 727 in the GTX in the 70's, both of which are now in...
Sure, some shots for sure. Hemi build is just starting now. Have the block, putting together the parts list. Yes, 727 from a 68 GTX with...
Thanks! The best for last![ATTACH]
Thanks! The black rims were 315's, 60R15 on a 10" rim. They were from my other car.
The tires on the car now that is is blue are...
Today the hood pins and height adjusters on all 4 corners got set and trim installed across the front.[ATTACH]Went with 3 studs, I like the look...
No flights scheduled. I'm enjoying every step of the build and dragging it out.
It will be a ride to remember abdywgn!
Scoop install and hood fitting time.
AAR. Fantastic fit.
[ATTACH]Supports install next up.
[ATTACH]Can't believe how well this fiberglass...
Yes, for my 68. It's actually a bolt on, I'm going to pin it though. 6 lbs more but there's the option to switch over at any time.
AAR hood and scoop showed up today. Time to get busy.
Completely satisfied with this fiberglass.
[ATTACH]The front bumper got a new...
I went with the AAR hood and scoop. Very nice product.Boxed very well.
[ATTACH]It doesn't get much better than this.
Today the rad got fit into place, transmission lines ran from cooler to trans position and horns relocated ahead of the rad support.[ATTACH]...
And that pretty much wraps up the interior.Buckets finished and installed.
[ATTACH]Door bars not a problem whatsoever
Abdywgn that's soffit material, boxed in the stairs with it.
[ATTACH]Both buckets finished today. Refinished the bases, will be bolted on...
Been working on the Dart as usual. Some pictures.Door panels on. These are the originals.