Separate names with a comma.
What times and gearing do you got i the wagon?
Harland sharp makes them[ATTACH]
The flowing was done with a bore of 4,10 and with 2" exhaustpipe.
Well we will see what kind of cam it gets. Roller or flat.
Got my w5s back today, was hoping for better flow numbers.[ATTACH]
Thx now even i get it :-)
How much gain do one expect from unshrouding the valves gains?
I did buy the pistons some years earlier than the block.
Well i think if you have...
Why go more overbore than you have to?
I did find nice pistons and rings for my R block. Going 4.04 bore.
Just trying to learn :-)
Does the w7 share intake manifolds with w5?
How about the headers?
Is the problems with the w5 still there with the blue plugs casting or is it better?
Do you drive it with a solid flat tappet?
I belive i did, not much knowing of the work that has been done.
Bought the on ebay some year ago and now they are being fixed. When i bought them...
This is a new build with a new R block, i will bee doing bracket racing only so its a drag car.
I belive that the comp will get to about 13.5
Considering mec roller or solid flat tappet.
How big would the gain be?
Those plastic ones[ATTACH]
Finaly a block worthy the pistons![ATTACH][ATTACH][ATTACH]
Får du ihop bilen till Sommaren hoppas jag se bilen på Barracuda träffen i Rättvik :-)
Is there anyone here that have the torq spec of the 4 mains bolts?
Are they the same as the torq spec for the 2 bolt mains?
The msd ignition does it work with vvt?
Iwe got a 5,7 truck 2013 and a 6.1 from a jeep srt 8.
I like this idea with a hemi in my old truck :-)...
Iwe ran 10:97 with my xhead 408 with 465 brake hp in my 3050 lbs valiant wagon.[ATTACH]
Thx i will try to find the loss somewhere, atleast now i have some idea of what to look at.
What would the problem bee when you have like 0,8-1 Volt here?
Ive got this problem on my d200 pickup.
Charhing 15-15,4 volts deping on the load....
Yes it is metric here in Sweden
Flowchart from my Indy LAX heads.
I didnt flow them but the guy that owned them before did.[ATTACH]
I havent figuerd it out yet if those block need oil restriction or can handel a sold roller yet from stock.
Do you guys know that?
Looks like i...
Naaah i will just only go 4.04 to start with.
Got some nice pistons allready.
Will be doing a 410 stroker with w5 heads.[ATTACH][ATTACH]
I left my block to bore it today and checkt the place where you did mention the R3 and i also had it stamped there.
I will check that next time i'm in the storage
Is your block four bolt mains?
Iwe got a block like that also. Rought 3.91 bore.
Allways thought it was the first gen R block.[ATTACH][ATTACH]