Separate names with a comma.
1973 - 1976 Dart 4 Door, Dart Swinger, and Dart Sport "beak" trim. Goes above the grille.
FYI fits 74-76 Valiant/Duster/Scamp
Up for sale 74-76 dart taillights
Pm or post
The beak is different 73-74 are but different than 75-76.
The center piece where the grill ,punt sticks out further on a 75-76 which causes the...
Man if only the dodge plate was a worn Plymouth one
Do you have any other worn decorative plates?
A price would help you cause bud
1973 and 1974 Only
74 was first year but not all got front bumper shocks
My 74 Swinger that came from factory without bumper shocks and uses those pictured
Ok cool wont work for my application but here is a link with pics: http://www.autometaldirect.com/amd-67-69-dart-trunk-gutter-set-6pcs-p-2765.html
Could you post a part# of the parts in question. I am interested depending on which they turn out to be.
No problem glad to help.
Good luck with sale
that's 70 or 71 if you look at the marker light hole
Thanks for posting that John. I will email the guy about the door panels and see if he will hold them till I am up there in may
pic and price of "nos" header panel please
73 and 74 have different mounting holes than 75 and 76 therefore they do not interchange
Will not fit 73s
73-74 Duster Bezels
Bump it up
Just an FYI
73 and 74 are slightly different in appearance than 75 and 76
but both will swap just will not match the number of horizontal fins...
Correct for 75 only as they switched to amber for 76 model year but will still fit in both
Can you post a pic of the overflow? Was it on a 22 inch or 26 inch radiator car?
1973-76 A Bodies
It is an aftermarket cap but a replacement cap for a 72 down which explains why it sticks out on his 73
Might be for 72 down since the filler tube mounts from inside trunk instead of slippin through the 1/4
All 73 ups were mounted like this...
Also Dart Sports and Dusters only have 3 screws holding the filler neck on
Dart and Valiant 4 doors as...
The filler tube is held in by the screw getting held into the 1/4 panel.
Maybe use machine screws with nuts to hold it on if it cant...
Well that sucks that it sticks so far out on 74s. Cause I was gonna install it on my 74 but have yet to do so.
If you change the design could I...
They changed to plastic in 73
lol....you don't say??? :thumblef: