I bench bled it in the vice, no issues getting it bubble free. After research on here, I also cracked the lines on the master with pops holding one pump to see if I got anything at the master. The car HAS been sitting for a little over a year, other than in and out of a paint booth, but I...
He must connect IGN1 and IGN2 together and route that to the hot for the MSD. IGN1 is "Run" and IGN2 is "12V when starting. Both must be connected together when using an ignition like the MSD that eliminates the ballast. Sounds like all he has is IGN2 hooked up. It goes dead when you release the...
So my buddy has another issue with his ignition in his 67 Cuda 340. It seems that the motor fires fine, but shuts off as soon as he lets the key off the start position. Its obvious that current is not flowing in the run position, but he is not sure where wires would be gone awry, he has not...
So it is actually a breed of cow with biggest herd in Japan. And it is a very small herd that has been selected bred and thinned over the years. It is famous for the marbeling of the meat throughout. There are some very small herds in North America but Japan has a stranglehold on export.Cows get...
I’m glad that they were able to get to the hospital. I had a heart attack and didn’t know it until a quad bypass later. That was five years ago hopefully we have a bit more time. As. stated above get plenty of exercise and eat right . Good luck to you.
I have one of their purple guns. Have yet to use it, but they have great reviews. I talked to Southern Polyurethane about it and he was familiar with it. Said it would work well for paint but that it was really better for a primer gun, but he had nothing bad to say about it.
Stay strong brother.
Wishing you the best.
I'm one of the ones that can relate to you in one way or other.
Got a cow valve on my heart now, 4 years ago.
Had EKG's done, Friday, and the results all came back a ok.
Hang in there.
so the drivers side takes the 3 pin style , but only uses 2 wires to work, but the passenger side is a spade terminal , and takes a single spade switch ? not the 2 spade switch , I will have to see if I can locate a single spade switch , thanks