Separate names with a comma.
Wanna scratch the tires on shifts. It’s a bit of a barge, but with the engine mods, it’s should have plenty of power.
Would like to keep the lockup if I can. Just thought if I do any highway cruising it might be good to have. I have a 727 VB at my disposal, it’s non.
1985 Diplomat, 904 or whatever variant there of. Looking for a shift kit. Mancini says there isn’t one for the lockup. B&M says 10228, TransGo...
Close to Comp number
No, 1970 340
[ATTACH] The cam is lined up with the small dot, straight up and down.
Dad, post the pics you sent me, it will help everyone understand what yoUr trying to say.
The rockers are adjustable Comp, flat tapped cam, hydraulic. He also put a new set of lifters in less than a week ago.
This is the second time this engine has been apart. The first time was due to the oil pump not being tightened up, so it ate some crank bearings....
Summit shows a new Comp with .525 lift, which is the step down Dick was talking about for $157. They have it in stock. I can help you with...
So June of 70 wouldn’t necessarily be all that early....
Anyone know when the 360s started production?
Just stumbled on one that says 6/17/70
Could the person who PMd me a few days ago about the cams please PM me again....
Might have access to a Victor 340
Only difference should be spark plugs. Older heads used the sleeves.
After further review, it wouldn’t work for me anyway,it’s a flat tapped, not the right cam for that engine
I get it, just offering
Will buy the cam and lifters for your asking price of $100, do what you want with the rest. Will pay for shipping to 78624
Have a 65 head if you can’t find one
It’s a roller, thus the discussion. I’d rather have a more aggressive cam than an RT. Looking to get upwards of .450 lift. Don’t think a...
Got part of my answer from a local machinist, a FT cam cannot be ground to use as a roller. FTs are cast...rollers are billet.
Depending on how...
OH CANADA!!....don’t know the rest of the words..but you get the drift...
Looking for a cam for my Diplomat, yeah, I know, it’s not an “A”. Something in the .450 area, bigger or slightly smaller would work. Has to...
But it it a roller cam engine?
FT or roller?
It’s been a bit, but I have to resurrect this thread.
Pulled the intake on the Diplomat and it turns out it’s a roller cam engine. I ordered a...