Search results for query: *

Hey Everybody, I have found several posts on this subject and there have been suggestions that you can use the chrome lockstrip from the 70-80s dodge trucks. My question is has anyone actually done this with any success? Thank you in advance

Has anyone ever run this cam? Lift 443/465, adv. duration 280/290, duration @.050 214/224, lobe sep. 107/117. I know everyone likes the comp stuff, I put the XE268 in my 340 but I had this laying around (new) and figured I would try it in my 360 (mild hyper pistons, stock j heads but all...

How do I know if i have them installed? I am installing a new cam with stock springs. The cam maker said stock springs are ok but do not use rotaters. Thanks

Hey everybody, I have a pretty new converter that is 11 inches. I am thinking of using it behind my 360 with 391 gears and 280 duration cam (67 dart) I know you can't tell me what the stall is but is it a higher than stock stall based on size alone? I am looking for around a 2500 stall.

happy birthday to all my fellow Marines. Semper Fi !

Ok heres the deal, My buddy has a 70 dart (340) swinger that he bought new when he got home from Vietnam. He put 30,000 miles on the car before wiping out a cam lobe, then he parked it. So it sat in his back yard for the last 30 years and needs a complete restoration, no seriuos rust issues but...

Hi , Just wanted to get your opinion on this cam I picked up it is an old crane. Kind of a strange one , 460 intake 450 exhaust 280 intake advertised (224 @050) 107 atdc 288 exhaust adv. (232 @050) 117 btdc Thinking of using it in a 360 with a basic stock rebuilt bottom end (hyper...

Just wanted to give a shout out to all past and present Marines, semper fi !!!!

Hey guys , My wife recently picked up a 360 roller motor ( 89 casting) at auction ($75) the heads came with it but were off, no pushrods. I am thinking about running it as is with just a timing chain swap and a new oil pump there is almost no ring ridge and I can still see some cross hatching...

Hey everybody, Just like to get some input on my 340 build have not assembled yet so not to late to change 70 340 block 40 over stock forged crank 10/10 arp rod bolts cast (stock) pistons earlier compression 10.2:1 (so i am told by machinists) moly rings j heads 2.02 valves hardened seats...

Hey everybody, Just bought a 71 dart 4 door with a 318 for parts. I have not seen the car yet and the guy I bought it from doesent know anything about it what are the chances it has an 8 3/4? was that an option or did ma mopar make the call on that? Any thoughts or opinions are appreciated the...

Hey guys I have the chance to grab an 8 3/4 out of a 69 van how much will this have to be modified to fit an a-body? thanks guys

Hey guys I am having one of those weekends I swapped out the valve body on my power wagon today (it was shifting to harsh into third) so i get it all back together and take her out for the first few miles it worked great then started slipping not when it shifts only when you start out forward or...

has anybody used a ld4b on a 340-360 i know it is essentially a ld 340 with smaller runners for the 273 -318

Hi does anyone now anything about the crosswind intake for a 340? where are these intake made? they are way cheaper than the eddy air gap. thanks in advance