Search results for query: *

Bare block- $75 Head w/valves- $50 Cast crank- $40 (No picture at this time) You must come & get this as I don't want the hassle of shipping at these prices. I have other small items for this engine also, just ask. I'm in the Pa. 19030 Zip code.

I have a brand new, never used slant manifold that was going to be used for a turbo set-up. slight surface rust only. I will not ship this. Local pick-up or, I will take it with me to Chryslers at Carlisle this coming Summer. $150 OBO. I'm in Bucks County, Pa. 19030 Zip code.

Selling brand new, never used, only mounted on my project car & not driven. A-Body leaf springs. NOT Super Stock but H-D. One spring clamp was removed for clearance of CalTrac bar on right (Passenger) side. New pair of clamps go with them as seen in picture. Front spring eye bushings for CalTrac...

All factory, 318 V8, NP435 trans, Dana 3:54 rear, 96,0000 miles, NO rot. Truck was in a warehouse for almost 25 years when I got it. I got it to run & move on its own (It runs great) but under hood wiring harness is gone along with the sheet metal parts & could not find them anywhere where the...

Not perfect but, not rotted. Storing it in my basement for over 2 years. Obviously needs paint & a little bodywork. $40, come & get it. I'm in the 19030 Pa. Zip code. I have & can take pictures of specific areas if interested in it. TIA

I was wondering what year these wheels were introduced, 1969? Just curious. TIA

This all came from a running, driving 76 D-100. ASKING, Bare block w/main caps $75 Head w/valves $60 Electronic distributor $25 Rocker arm assembly. w/bolts etc. $30 Rods/pistons $30 Misc. brackets $10 each Balancer $25 I have some other things for a slant engine, just ask, I may have it...

5% off, Good until September 5th, 310771152247756036.

I have like new engine take off parts from a 2006 Road King. It was bumped up from a 95 C.I. to a larger displacement engine from the day my friend bought it brand new (And he still has it) so, it has no street miles on all of these items. I was going to put the top end on my 04 FXDX which was...

I have an 86 D-250 that's been sitting in a warehouse for over 24 years. Before I attempt to crank it over, I would like to prime the engine first. I'm guessing it's the same as priming a big block but want to be sure. I haven't done any of this stuff in a few years & would like some guidance...

Up for sale, you come & get it. I believe this is a 1968 225c.i. engine. Was in a running driving truck. $200. I have some other stuff for this engine for sale separately. I'm in Bucks County, Pa. 19030 zip code, very near all major routes including I-95/295, Pa. Turnpike, Rt-1 & Rt-13. I have...

I got this engine from a friends 76 D-100. These are the #s that I got off of it. Can someone tell me the info gained from these #s? I want to be sure what it is actually, be for it is put up for sale, whole or parts. Thanks for the help.

I have an A518 transmission I removed from a running, driving 90 4WD 360 TBI RamCharger. It still has the convertor installed. It's dirty but was working when I pulled it recently. Asking $175 for it but will not ship it, you come here & get it. In lower Bucks Co. Pa. 19030 Zip code.

I have a working transfer case from a 90 RamCharger for sale. $75 but must be picked up as I will not ship it. I also have the a working A518 transmission from this truck, $125 you pick it up. I will get pictures of the transmission if any interest. Information tag in picture. I am in Bucks...

Good untill April 11th 295970322247756036

I have a slant six from a 76 D-100 but not sure if this is the engine it came with. Where is the casting date on these engines? I never looked on this engine & don't remember where they were. I forget stuff a lot. Plus, it's under a tarp in my driveway & it's pretty cold out now.

I pulled a A518 trans out of a 1990 4wd Ramcharger that I'm scraping. How difficult would swapping over to 2wd be? Just a tail shaft change? Output shaft change? Has anyone done this & is it worth doing? It was a working truck when I bought it, so I know the trans works. TIA

I know it's not an A Body but, I have a very nice instrument cluster out of a 90 Ramcharger I'm parting out. I would like to confirm that the electronic speedometer is working properly. I have it, along with the whole wiring harness & VSS assembly removed from the truck. How do, or can I check...

Engine was in a 76 D-100 Pick-Up. What you see is what you get. It was a good running engine when pulled 2 months ago. It has been sitting on a concrete driveway with a tarp over it. Asking $150, OBO. I'm in the 19030 Zip code, very close to I-95/295, Rt1 & Pa Turnpike & Pa/N.J. Turnpike...

Complete engine, top to bottom, front to back. 134,000 mi. Was a running motor before I removed the wiring harness. $400 for everything. If I don't sell it in the next few weeks, I'll keep it myself. A lot of good parts on this engine worth way more in parts alone but I will not part it out...

I was wondering if anyone has used the SAKER portable welding machine or ANY of their products? Are the products they sell pretty good? Just wondering if this welder is worth buying for quick welding jobs instead of getting my M.I.G. set-up for fairly light welding jobs. What say you? TIA

I have 2 brand new A/C Delco rear rotors, part # 18A1685, $80 + shipping for the pair A new set of Bendix rear pads # CFM980, $25 + shipping & a set of Raybestos parking brake shoes # 829PG $20 + shipping, all for a 04 Volvo XC90 SUV Buy all of it for $100 & save even more on the shipping...

This thing is pretty much loaded with factory options but rotted beyond being worth fixing, no real bites on FTO so far but, I will be taking all of the front sheet metal for another truck of mine. Pretty much everything else is for sale. Running 5.9 TBI engine, 518 trans., 9-1/4" Sure Grip...

This is out of a 76 D-100. Engine runs good, trans. is kind of noisy but works fine. Basically, what you see in the pictures is what you get. Offy intake, Holley 2bbl carb & new exhaust manifold come with it. (stock cast iron type) Asking $450 OBO, you come & we'll help load it. Worth it in...

A friend of mine has a complete, running /6 & noisy but working 4speed O.D. 833 attached to it from a 2wd 76 D-100 pick-up he has. We are installing a 6.4 HEMI & 6speed in this truck. The slant 6 has an aluminum Offy 4bbl manifold & Holley carb & factory electronic distributor. He wants to sell...

I have a 2-speed wiper motor from a 74 Duster Parts car I had but have no wiring harness. I'm pretty sure it works fine but not positive. My question is, how do I hook wires up & where, to check proper operation. Thanks.

From a 1990 4wd Ramcharger. Runs, has 134,000 miles on it & still in truck so you can hear it run. $400 OBO, you pick it up in 19030 Zip code area. I will remove it if any interest.

Selling for a friend from a 69 Dart 340 GTS & 69 Super Bee. I don't know anything about them only that they turn free. What you see is what you get. Will NOT ship, you pick it up in the Bucks County, Pa. area 19067 Zip code. $450 cash for the A-body & $750 for the B-body w/Hurst Super Comp...

One rim is 4" B.C. from a 69 Dart GTS, the other is a 4-1/2" B.C. from a 73 Duster 340. Only have 1 of each & won't dismount or ship them. If you're interested, you come a get them. I believe they were both spare tires. $50 ea. in the 19067 Zip code in Bucks Co. Pa. near Rt-1, I-95/295 & Pa...

All prices include shipping in the U.S. via USPS flat rate & prices are negotiable. Time to get rid of stuff I'll never use now, with more small Mopar items to come soon. 2 Lg. alt. brackets $40 ea. alt. adj. bracket $25 Pulleys $30 ea. Harmonic balancer $35 Block to trans. brace $20 Dip stick...