Search results for query: *

I have this alternator bracket for the old Poly 318 engine. And early 64-66 273 engines. Labeled 1965, so that's more than likely the year car that i got it off of, back in the dinosaur days. I'll sell it for $20.00 and whatever the mailman will want to your zip code. Payment, i accept Pay...

I dug out some more parts, buried deep in the storage shelving, in the garage, and haven't a clew anymore what they are for. Anyone looking at the picture know what they are for, that i saved for some reason or other? Thank's a lot.

My current pair of LCA's that i now have for sale. Rebuilt pair #19 And now, this is the very last pair that i have for sale. If i don't find anymore to rebuild, I'm out of business, doing these. And 30, 40, 50, year old cars don't show up anymore at the self serv, Pick-N-Pull wrecking yards...

Well, guess i collected, saved, power steering pump mounting brackets from back in the 70's when cars were find able, to be picked over, at the U-Pull-It wrecking yards out here in California. Ok, here's what i have. 1. PS pump mounting brackets for the old Poly 318 engines with a TRW pump...

I have this power steering pump, mounting bracket for the FEDERAL pump, that is used on the Mopar big block engines. The last one, that i have for sale. Officially i think it was used from the 1969 to 1972 years, but use it on any Federal pump that you want to, and any year engine that your...

This is a second intake that i am now putting up for sale. My other one sold, pretty quickly. If you missed out on the other one, you now have another chance. I have this factory, cast iron, 2bbl. intake manifold that is used on the 1959-1960 383 RAISED BLOCK engine, that was used in the...

This is an Oval air filter element that is used on the late 50's, Chrysler, Dodge, DeSoto, engines that were equipped with dual 4bbl. carburetors. Figure on the 1957-58 era of engines, back in the day. This is a NOS air filter element from NAPA, back in the day. The number is NAPA 2030. I only...

I am putting my vintage OEM factory, Mopar, Chrysler, Dodge, Plymouth, air cleaners up for sale. These round ones are for the 59-64 cars that are equipped with the 361, 383 413, "Long Ram" and "Short Ram" (Crossram) (Sonoramic) Intake manifolds. The Chrysler letter series cars, and lots of the...

I am putting my vintage, new old stock, OEM factory, Mopar, Chrysler, Dodge, Plymouth, air filter elements up for sale. The oval ones are for the 58-62 cars that are equipped with the 350, 361, 383, 413, Dual 4bbl. inline, intake manifolds. The round ones are for the 59-64 cars that are...

I am putting up my collection of Carter AFB 4 barrel carburetors that i have had for the past 40 + years, when going wrecking yarding during the later 1970's and early 1980's, at the U-Pull-It wrecking yards, out here in Northern Commiefornia. I was a professional auto mechanic earning my...

This is my 1964 Superstock, Race Hemi, exhaust system, that i am putting up for sale, out of my 40 year collection of Hemi parts. This is officially a 64 system, with 1 7/8 tubes on the header pipes. The header pipes and exhaust system is priced at $6,000.00. That's the price, no "offers"...

I am listing my 1964 426 Race Hemi Crossram Intake Manifold set up, from my extensive 40 + year collection of Mopar engine parts. This manifold is date coded 6 . 17. 64 Casting number 2468043. This Aluminum intake has original Carter 3861 4bbl. AFB carburetors on it, and fuel lines that i made...

These are a pair of Carter AFB 4bbl. carburetors, 3816S, that are used on the 1964 Race Hemi Crossram aluminum intake manifold. They are intact, and nothing is missing from them. Been in my collection for the past 40 years. I never used these carburetors, so i have no idea what jet sizes...

I have these engine mount brackets, that i have been informed that they are for the 318, 340 cubic inch, small block engines. But i DO NOT know, if these mount brackets are any different for the A, B, C, E, body line of cars. What you see pictured, is what you get. Selling them at $50.00 for...

Found these engine mount brackets buried deep on one of the storage shelves, out in the garage. Haven't got a clue to what year(s) they may fit, bit i am assuming they are small block mounts. And i don't know if there's any difference between the A, B, C, E, body cars. Anyone care to look at...

These are a pair of disc brake dust shields that are used on the 1973-76 A body cars and 73-74 Barracuda's and Challenger's. These dust shields have the proper center opening for the larger inner wheel bearing that was used during those years. A good dust shield to use when upgrading to the...

I have a small box full of original, 12 point, Strut Rod Nuts, that are used on early to mid 60's A and B body automobiles. Thread diameter is 9/16 x 18. I'll sell a pair, (2 of them) at $14.00. Can mail them out to your zip code in a small, padded mailing envelope. Need your zip code for a...

All these parts are for 9 inch A body DRUM brake spindles, that i am putting up for sale, out of my parts stash, hoard, collection, rat hole. Spindle nuts Washers Nut retainers. Bearings. Seals Grease Caps $20.00 set of spindle nuts, washers, retainers, for both left and right sides. $30.00 set...

dodge plymouth mopar lots of parts, - auto parts - by owner - vehicle automotive sale - craigslist Since a parts stash of parts is currently being talked about in the "Mopar General Discussions" forum, i thought i would post this, if anyone else might be interested in a collection. Lots of...

From my transmission rebuilding days, found out that i have this new old stock, transmission band used in the 426 Hemi Torqueflite automatic transmissions. It's a Raybestos manufactured band. I'll sell it for $325.00 bucks, plus whatever the mailman is going to want to your zip code. Payment, i...

My current pair of LCA's that i now have for sale. Rebuilt pair #17. This is the latest rebuilt pair that i have in stock, without sway bar mount tabs on them, for sale. I'm now down to only having two pairs of these LCA's in stock. Get them from me while you still can. These are a pair of...

I have these Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors. All cleaned up, soaked out in a pail of Evaporust, then painted up. Ready to bolt on, and go. Selling at $50.00 for a pair of them. Payment will be thru Pay Pal. I will mail them out in a...

YES, i know this is the "A" Bodies site, but please forgive me for asking this question here on this site, also. It's important for me to find out. Thank you. Jim V. hemi71x Would anyone out there in the Mopar world, know where the Purple, 1971 Hemi GTX 4 Speed car, in now located, and possibly...

This is a rear window defogger blower motor, and bezel, used in the A, B, E, body line of cars. Selling at $90.00 for both of these parts. I figure shipping will be $24.75 in a USPS, large, flat rate box. Payment i accept Pay Pal, or a USPS money order. Thank's a lot. Jim V. hemi71x

I have this 426 Hemi "Heat Tube" that was a spare part if i ever needed it, from back in the days, when i had my 71 Hemi GTX 4 speed car. I only have this one. Yes, it already had a repair somewhere in it's lifetime, and it needs a repair in a small hole welded up. I'll let it go for $25.00...

I got around to rebuilding all the single piston calipers that i have in my stash of parts, that i now am putting up for sale, along with the Bendix, 4 piston calipers, that i also have been selling on the "B" bodies forum. Anyway, here's what all these calipers are for, and the applications...

Come to find out i have two sets of factory original, OEM, lower ball joint, to spindle mounting bolts, with the factory, foundry marks, on the head of the bolt. For the A, B, E, line of cars. Note, NOT for 1972 and earlier A body cars. Selling at $30.00 for a set of 4. I guess the best way to...

I have these disc brake spindles, that i am putting up for sale. Please read this ad thoroughly and understand it. Both of these spindles are for the LEFT Side, DRIVERS Side of the car. The spindle pictured on the RIGHT, is used on the 1970-72 B & E body line of cars. It has a smaller diameter...

I also have these Pin Type, and Slider Type, caliper mounts for sale, that are for the standard 10 3/4" inch brake rotors. To go with the single piston calipers that i also have for sale, if you need them. All cleaned up, soaked out in a pail of Evaporust, then painted up. Ready to bolt on...

These are a pair of disc brake dust shields that are used on the 1973-76 A body cars and 73-74 Barracuda's and Challenger's. These dust shields have the proper center opening for the larger inner wheel bearing that was used during those years. A good dust shield to use when upgrading to the...