Search results for query: *

ok does have a linkage, it does run good i just thoughtyou would be able to see it spray gas.

it is and thank you

ok i have a mild cammed 340 in my 74 duster.airgap and 1406 eldebrock carb msd ing.question is if i look down in the carb there is 4 places for gas to come out into the carb body.the back 2 i assume is the 4 brl.. ok the front 2 lots of gas back 2 very little if any. and that would be just...

no i dont have wire dia. is it possible i just burnt out the reg.

ok what i did was jump(just touch) a wire from amp gage to the gas gage nut on pc board.the gage went to full. removed wire and noticed i lost oil light, was on with key on but not started.then i moved bulbs around it never came back on.then i jumped amp to temp gage same thing went to hot.then...

most likely i cook them, tested with 12 volts thank you i guess i'll look for new dash thank you

1974 duster is the regulator the silver box on back of dash

ok temp and gas guage dont work did before i removed dash 2 years ago can short gauges over from a hot wire they move tried to run jumper wire from gas sending unit both hot and ground still doesnt move have ran new ground to dash

just went and look it appears to be round forge crank the tranny is rebuilt the man is suppose to find out what value body ect and new 3000 stall converter

thanks fishy i do know the crank has 6 bolts i just didnt want to bye i trany and converter and not being able to use it

i believe its a 71

is this the flexplate i would needhttp://www.jegs.com/i/B%26amp%3BM/130/10239/10002/-1

thanks kim but i think i miss wrote i want to put a 360 904 on a 340 motor again sorry

can you hook a 360 904 to a 340 seams to me i read somewhere you need to knock off weights or something aftermarket converter

thanks guys

mild 340 about 320 hp i have a torker and a performer a 600 eldebrock 600 and a holley 650doulbe pumper which should i run and why street car

hoping not to do that but thanks

how can i tell what size valves a j head has n the motor is suppose to have appox 320 hp mid cam 650 carb he is not sure if original heads but are j heads he did hp rating by time and wieght tire size and gears hope you can help thank you

im in need of a drivers side tail light trim doesnt have to be be perfect but would like a decent one but at this point anything is better then fender washer holding my light in shipped to 13903

how much for gas cap and duster emblems

my wife and i put 2/3 of our paychecks in joint account for all bills and gas 1/3 is ours for whatever you need to have your own money at the end of week to feel it is worth working cant just work for bills gets depressing lol

thank you

bump

sorry 1974 duster

can anyone tell me how far off the back edge of the trunk does the back of the rear of the pedastal go when mounting thanks in advance roger

i have a 5' probaot if anybody interested water cooled would consider trade for parts mainly a small block

recieved my wing from flmopars today great guy to do bussiness with would deal with him again

i live in binghamton

do you still have the buckets for sale id be interested i have bench with good tracks just needs recovering if interested

yea i know but never really cared for factory wing i do have the aar spoiler i think they car it new in box for it sat it on but kinda like this look better