Search results for query: *

I want to build a ram jet style port injection system for a 400 B motor. It is going in a stick shift 70 Dart Swinger. The trans is a 1970 heavy duty A833 with the bigger 308 bearings and the rear is a 3.73 Dana 60 with power lock. The motor is .020 over with zero decked kb pistons, forged 383...

I just finished setting up the 3.73 gears and power lock diff in the stock width Dana 60 for my 70 Dart Swinger. I need to weld the spring perches on now. Should I just duplicate the angle of an 8 ¾ housing? I have a good E-body housing to use as a guide. My car has 002-003 super stock springs...

Come get this van. It has a running /6 and rebuilt 904 trans with new converter. I have a title PA but not in my name and not signed. Van is pretty rough. Could be fixed but more for parts. Located in Glen Mills PA $500

I was there on Saturday. So many cool cars in the show this year. I bought a set of A-body small block headers and an early B-body 8 ¾ housing with axles. All for $ 70

Who has shipped a non running car from the west coast to the east coast? Any ideas on who to contact? How much should it cost?

I made the mistake of letting a guy I used to work for know I can do this kind of work. Now he calls me every time he gets it. The first time I do a particular vehicle is a challenge but I usually remember what fights me hard until I figure it out. This is a 2005 Jeep Grand Cherokee.

This is one of the most out of control cars I have ever driven. It came into my buddy's shop needing repairs. The owner just swapped a 63 Impala small block four speed car for it. Previous owner had it all screwed up and current owner is a guy with more money than skill. I got called in because...

I just replaced the motor in a 2004 ram 2500 and ended up with the core. It ran with no noises but smoked like a frieght train. I have not pulled it does to see what the issue is. Do these motors have problems with the heads cracking? Head gaskets? Was thinking about putting it in an early...

Replacing a 5.7 in an 04 Ram 2500 pickup. Disconnecting everything was not that bad but they are real tight to actually get out of the engine bay. Had to pull the drivers side engine mount and bracket off the block to get it out.

Rear quarter and back glass from a non A/C 73 Cuda. Probably no tint. $150 in Newark Delaware. Not interested in shipping the back glass.

Sad mouth Challenger grill. Not perfect but no major damage. Comes with emblem. $100 plus shipping from 19711

This 1970 Dart project is a roller. Was originally /6 automatic. I bought the car pretty much as is. The car is mini tubbed and has sub frame connectors welded in. Has a narrowed Dana 60 housing with early big ford ends and bearings. The axles are the old 7 1/4 ones sleeved to a light press fit...

Holley low deck street dominator for 383-400 big block. About the same as the M1 but has a lower carb pad height for increased hood clearance for an A-body. No longer in production. $200 plus the ride from 19711

Got my never used lakewood scattershield off this site from jamey out in western pa. Super happy with it. It has the correct 4.8 inch register hole for my 308 bearing heavy duty A833 and ce with block protector plate. Are there any tricks to making these work in an A-body? I am modifying a spool...

This came into my buddy's shop for a carb swap. Sorry it is not a mopar motor but it is a 454 with a manual transmission. Must be a monster to drive.

Very good condition just a little dusty. No stripped threads. One of the better single plane intakes for the low deck. No longer in production $225 plus the ride from Newark Delaware 19711 Thanks fabo

Saw this bad *** Duster today in central jersey. Members car?

Is a late Dana 60 housing with the tone ring for abs compatible with a power lock position unit? This rear has 3.73 gears and an open diff. I have a power lock for 4.10 and lower.

Running /6 and rebuilt 904 trans. Currently in a 1985 van so can hear run. Van is in concordville PA just south of Westchester. $500

Made this fine leather couch out of the back seat from a 94 Jaguar XJ12. Needed something comfy to sit on out in the garage.

I have wanted something better than my small 110v mig welder. Well I went to look at a used 220v lincoln today. The unit looks barely used and was purchased by the guys father in the mid eighties. Does spot and stitch with all kinds of adjustments. The gun is in good shape and a nice size. Not...

Got this line lock with a pile of good tools including a pneumatic riviter, 1 1/2 to 2 inch combination wrenches, 3 stone hone and a snap on adaptor to pressurize cylinders. Everything for $25

I am about to buy my first Chevrolet ever. I went to a local tavern to watch an NHL playoff game and was talking to the guy next to me at the bar. Turns out he has a 1957 hardtop bel air that he wants to sell. It is all in boxes and no drivetrain but in pretty good shape.

Just a heads up if anyone is looking for one. It has a single quad top, asking price is a grand

I am installing a peerless pf80 and need help in selecting and purchasing the correct parts to complete the job. Parts would include thermostat, circulation and zone pumps, pressure regulator, expansion tank, temperature/pressure gauge, air separator etc. Please pm me if you can assist. Thanks

I was leaking large puddles of oil out the back of the motor. My first thought it was the rear main seal but the leak seemed too big for that. Well I pulled the pan to have a look and found this.

Well until today I had never had a ballast resistor fail in 30 years of driving old mopars. It was on my 68 D100 and happened at the bottom of my driveway. Had to go swipe on off a 70 dart sitting behind the garage.

2 door Dart shell. Has no front clip or interior. Have PA title in my name for the chassis. All glass and doors in good shape. Would be good for rebuilding a car with rotted out frames. Has bbp fmj front brakes but no rear. Right side wheel house was removed by previous owner for minitub and...

A big thanks to him for hooking me up with a beautiful set of pro parts headers in trade for some stahl fenderwell headers. He and his dad are great people and looking forward to seeing them later this year.

I have this cool old book titled "tuning for speed" by Phil Irving. I was looking on line to find a used copy to give to a buddy of mine who is way into old British bikes. Every used copy on Amazon was $499 or more! Described as the most desirable motorcycle tuning book in history. I bought my...