Search results for query: *

  1. B

    416 Dyno

    Its hard to tell on the dyno how it will act on the street but yes it idles very rough. but it's a 4 speed and I use to drive that 340 with that cam a lot on the street, just keep it reved up. You've just gota get use to and drive it like your mad at it. :burnout:
  2. B

    416 Dyno

    It was a used cam that I had out of a 340 that made 430hp. I thought it was an older mopar performance cam and the lobes are .571... These are specs I found from a forum for a mopar performance oval track cam 40418 Cam Style Mechanical flat tappet Basic Operating RPM Range 4,200-7,500...
  3. B

    416 Dyno

    The motor ended up making 479hp @ 5800 and 489tq @ 4600. It was on 91 octane, with a 1" open carb spacer. With a 2" spacer it made 493TQ but lost 4hp. I accidentally put the wrong timing cover on, so I had to guess and make a timing pointer. It made its best power at 38 degrees but had some...
  4. B

    416 Dyno

    I'm off to the dyno for the day, I built a 68 340 to a 416, ported O heads with 2.02 1.6s. Flat tops, not sure on the compression but guessing around 11:1, .571 lift old Mopar oval track cam, ported Mopar single plane intake. The stock heads are the down fall for power but I'm guessing around...
  5. B

    Anyone got a picture of how the longer 70 B body pistol grip shifter fits an A body

    I put one in mine, But I put it in a vice and heated it up, bent it straight back, I kept trial fitting until it was where I wanted it. Just barely touches the bench seat when in forth. :burnout:
  6. B

    A few mor pics from WI

    The scoop is missing a piece, the scoops were only originally found on Demons and Dart Sports.
  7. B

    Hello from WI

    I put more pics up under mopar gen discussion
  8. B

    A few mor pics from WI

    Put my scoop on today, thought u guys would like to see the spoiler and Ipainted the rear stripe on myself. My buddy also made wood grips for the B body pistol grip.
  9. B

    Trunk Lid Ribs

    Alright, that makes sense, now how about the direct connection spoiler, did they make them for both style trunk lids?
  10. B

    Trunk Lid Ribs

    How come i see some Dusters with center ribs, and some dont? What years did they do both?
  11. B

    Scoop parts needed

    Well, hmmm, i bid on a whole scoop lastnite, and fell asleep, and got outbid by two dollars, it went for 102.50
  12. B

    Hello from WI

    Its been to rock falls once, the motor makes 430hp and 410tq. with 3.23 gears and street radials it went 12.70
  13. B

    Scoop parts needed

    I have a duel snorkel scoop that came on 72 demons or dart sports. I am missing the bottom piece that fills in the bottom half of the scoops. I was wondering if any body had just the piece, or a whole one in bad shape? I am a body guy and can fix if broken.
  14. B

    Hello from WI

    My names Andy, from Chippewa Falls WI, my car is a 71 Duster 340 4speed. Hemi orange with side stripes and direct connection spoiler.
Back
Top