Search results for query: *

Came out of my motor with 1000 miles on it. Solid roller. Went to a larger cam. I believe it was a Camotion brand. $175 plus shipping. Located in central Fl.

Milodon 8qt oil pan and pick up. Fits 318, 340 LA small block $150 plus shipping and pp costs. Located in central Fl.

Set of 1:6 ratio rockers and shafts off a set of Indybrock heads. Extra adjusters included. $175 plus shipping and pp charges. Located in central Fl.

I was cleaning the motor for paint and saw this number that I never noticed before. It's at the top front of the block In front of #1 cylinder

Looking for steel roller rockers for a set of Indybrock heads. Any options other than aluminum? The Indys have the offset rockers. My thoughts are for street / some strip the steel would be a better option.

Had to pull the motor for a couple reasons but now is the time to make any changes. This is a pump gas street strip combo. I included the link to the original post for any info. The car ran good, 10.79 @ 123.33 the first trip to the track. The cam is a solid roller. Just didn't want to leave...

Rear shocks off my 72 Valiant with two trips to the track and less than a 1000 miles. They do have scratches but worked great. Lowered the car so I had to get shorter shocks. $140 plus pp and shipping. Located in central Florida.

Adjustable 8 3/4 snubber $30 plus pp and shipping Located in central Florida

Rear shocks off my 72 Valiant with two trips to the track and less than a 1000 miles. They do have scratches but worked great. Lowered the car so I had to get shorter shocks. $150 plus pp and shipping. Located in central Florida.

Adjustable pinion snubber for 8 3/4 center section. $40 plus pp fees and the ride. Parts in central Fl. PM if interested

Curious about this system. Anybody have any experience with these system. Good, bad. Any good at the track?

Hey Guys, Went out for a cruise the other day and when I got back to the house this trim piece is missing. It's on the driver side drip edge. PM me if you can help out. Thanks, Rob

I've seen them on here before but I can't find the photos. 71, 72 Valiant, Duster with a front spoiler. Looking for some ideas. There was a blue Duster for sale on this site a while back and he had what I'm looking for. Show me what you got

I have the 8 3/4 out of my car for sale. Housing measures 45 3/4 from bearing flange to flange. Perches are moved in to line up with frame rails. Also have the backing plates with 10 x 2 1/2 brakes. Pads, wheel cyl.and drums have maybe a 1000 miles on them. No axles. $250 plus shipping and pp...

For any 4x4 guys or dully owners. Dana 70 Just rebuilt with Dr Diff clutch pack and 35 spline internals. The unit is stamped 72699X. $350 plus shipping and PayPal fees. Located in central Florida.

New, never installed polished cast aluminum cover for a Dana 60. Cover, bolts and gasket. $75 plus shipping and PayPal fees. Located in central Florida.

Upgrading to a Dana. I have a 489 case with new gears (4:10) from Dr Diff, bearings are new. It's still in the car with a spool. I have a sure grip I took out to install the spool. Less than a 1000 miles on that. 1350 yoke. Package deal $600 plus shipping and PayPal fees Parts are located...

742 case with 4:56 gear ratio. M/W enterprises spool for 30 spline axles. $450 plus shipping and PayPal fees. Parts in central fl.

Hey guys What are you running for total timing on your small block strokers? At the track Sunday a gentleman informed me that I was dogging my car. My response was wtf. He proceeded to tell me I didn't have enough timing, jets to small, shifting to soon and I need a trans brake. And it would be...

Does the Wallce racing ET/weight calculator tell hp at the flywheel or rear wheel? My sound like a silly question but I'm not sure how much hp is lost thru the drive train. My calc is 10.79 3320# = 522.35

Hopefully heading to the track for test and tune Thursday night. Very excited to see what the scamp will do. Open to geusstamations on what it will run. 340 block with BPE 4.25 crank, 6.2 compstar rods, diamond Pistons. 10:1 to 1 comp. Indybrock heads, solid roller 250 dur 640 lift. 950 Hp on a...

Pulled the chunk today to go with a spool and noticed the 4:10 gears are in need of replacement. My question is any preference on brand or type. I was running a factory gear set. Big small block, 600ish hp, auto with Lenny's converter (4000) stall, foot brake. More street than track, but that...

Tried to post to the original ad, but it was closed. Finally got around to installing the valve covers. Looks kickass. Thanks bro

Just a heads up, tried to order a set for the cramp and their out. Be about two weeks before the truck rolls in with new stock. Bummer

90 degree oil filter adapter. $50 plus ship Pm if interested. Central Fl

I have a 103ci top end for sale. Heads, pistons, automatic compression releases and wiring harness for installation. All you need is to bore your 96ci cylinders. $350 plus ship. Parts are in central Fl. PM if interested

Assembly out of 71 340, std. crank, Pistons .030 over flat tops They were .005 in the hole. Rods have ARP bolts with Light weight floating pins. This includes the balancer. $300 Plus shipping. Located in Fla. PM if interested.

I have a 727 and was trying to hook up the saftey switch on the tranny. I don't have the three prong plug needed for the switch and I don't know the pin out to make it work. I thought it was a combo, neutral and backup switch. Thanks for any help

Small block LA Edelbrock water pump with 2 hrs run time. $50 plus shipping. PayPal plus% Parts in central Fl. PM if interested.

Small block 318/340 drag race oil pan, oil pump, windage tray and bolts. $300 plus shipping. PayPal plus their % is cool Parts in central Fla.