Search results for query: *

Pulled out my old 4 blade OE fixed fan and replacing it with a flex fan. The old fan had an approx. 2" spacer on it with really long bolts and the fan itself was only about 2" away from the radiator. (had to remove radiator to remove bolts). I don't think the spacer is original and he shroud is...

I'm unfamiliar with this third port on my mechanical fuel pump. I'm assuming is a vent from the pump to the crankcase filter. My question is, is this hose necessary? The original aircleaner assembly is long gone so I was planning in using an aftermarket crankcase filter, but I'm not sure if I...

Looking for many parts. Small things like a dome light and glove box light, to large things like disc brake control arms and larger rear-end. Would travel to Phoenix or Las Vegas for the right deals.

How hard is it to remove the oil pan in my slant 6 to replace the gaskets? I know I have to move the steering links out of the way, but do I have to unbolt the motor mounts? It seems as though I should have clearance with the motor in place. Thanks for any input

When looking at my z-bar (torque shaft) it seems to be too short. It measures approx. 8 1/2" and there is a gap of about 1 1/2" on the bellhousing side. I can grab the shaft and move it side to side, so I'm assuming it's the wrong one for my car. Perhaps it's of a v8 car, I don't know. What is...

I'm looking into having my original cluster rebuilt. I also want my oil pressure light replaced by a gauge. I've heard of AutoIntruments.com, DandMRestoration.com and RedlineGaugeWorks.com. Are there any other companies I can check out that do resto or custom work?

I have what appears to be the original bench seat in my Demon. While it has been recovered, I feel like I'm sitting in a high chair. I'm 5'11". Headroom is non existent and the steering wheel is in my lap even with the seat fully rearward. The front edge of the seat is 11" from the floorboard...

I have what appears to be the original bench seat in my Demon. While it has been recovered, I feel like I'm sitting in a high chair. I'm 5'11". Headroom is non existent and the steering wheel is in my lap even with the seat fully rearward. The front edge of the seat is 11" from the floorboard...

I have a '71 Demon that I plan to turn into a small block cruiser (currently has /6). She's all original and a runner, but needs the springs and bars replaced asap. Thinking about the .920" bars or possibly the 1" ones from Just Suspension. My dilemma is that I plan to run the /6 til I can...