Search results for query: *

The rubber section going up to rear axle was clear, but still plugged up to there. So just that I'm crystal clear I can open the bleeder at the right wheel and use the above procedure. Thanks

That's exactly what I have, so if I take the bottom cap off, Fluid should pour out and I can flush it that way?

Just so I understand, I should loosen the front brake line fitting at the PV or will it work if I slightly open bleeder at front right wheel?

Another question, I've got the rear flex hose loosened at the rear end, but should the fitting spin? I seem to only be able to spin the hose which is putting a bind at the other end. figured it out, and got it off, line is all clear. zkx14, can I pull the bottom cap off of valve without a lot of...

This is probably a stupid question, but where is the proportioning valve? Found it, and realized that it was never replaced when I replaced the master cylinder. Is there a way to clean it or repair it, or does it need replaced?

A couple weeks ago my brake lights got stuck on, crawled under dash and noticed the brake pedal was not coming back far enough to hit the switch. It seemed that the brakes didn't feel quite right so I decided to bleed them. I started with the passenger rear. My Dad pumped brakes up I turned the...

Thanks guys! Scott

Are the A body scoops and B body scoops the same or are they a different size?

*UPDATE* It was a blown headlight switch, replaced it and now let the night driving commence.

Was driving my 71 Dart and "BAM" lost my tail lights, side marker, and dash lights, everything else electrical works fine. No blown fuses. Any answers. Could it be in the harness in steering wheel? I did have the cam that controls the turn signal come off about a month ago and have to pull the...