Search results for query: *

Looking for single pulley set for a 71 340 block. [email protected]

I'm missing the starter seal that attaches to the SB bell housing. [email protected]

This is my first rear end rebuild so bare with me. I am trying to set the pinion and started out with .030 worth of shims. I am using a solid spacer instead of the stock collapsible spacer. The solid spacer was bought from Nation Drive Train (Last item on the page) When I assembled the...

Selling for a friend: 1968 Dodge Dart GTS. 340, auto, A/C car. Has VIN and fender tag. Needs headliner, carpet and paint. New floors, trunk and all the body work is done. Nice car! Call: Don at 413 477-0959 or [email protected] for some pictures. $8000 obo Central Massachusetts

Question from me to Lunati tech support: Answer from Lunati tech support: Anybody know the the typical install height on a J head? 73126 - Lunati Valve Springs Details Description Single w/ Damper OD 1.500'' ID 1.086'' Seat Load,Height/Load 1.800''/103 Open Load, Height/Load...

This is a drag strip project. I picked up ths 71 Duster as a roller a couple of years ago and been gathering parts for the build ever since. I gave the 71 Duster a wash today for the first time since bringing it home back in 2006. I wanted to get a better idea of what I was getting into. The...

Just wondering if someone fabricated an Auto steering column to look like a manual column. I was thinking you can chop off the shifter and the shifter indicator housing and fabricate a plate to cover the void. Anyone done it? Is it feasible?

I need a junk small block for small parts such as bolts, brackets and miscellaneous parts. Thanks, [email protected]

Anybody good with photshop? I got a logo idea I want to try.

We are having our 2nd Annual Cruise to Auto Rust Technicians Oct 18th followed by a barbecue at their shop. More info: Auto Rust Technician web site MassMopar web site

I had one rusted stuck torsion bar in a v-8 k frame I bought a couple of years ago. Sprayed WD-40, welded on a piece of angle iron and used a BFH. It finally came out but it took quite a few whacks. LOL.

Need clutch pedal, push rod and z-bar for a 76 Duster [email protected]

Need a 7290 coarse spline rear end yoke for 489 case [email protected]

Sunday, September 7 @ 12pm Rutland State Park. It has a pavilion, Rest rooms, picnic benches, barbecue pits and a nice field to park our cars. Here is the link to pics and info of the first cookout. http://www.massmopar.com/Files/mmco/album/index.html Rutland State Park Rte. 122A...

I have been wanting to built an engine test stand. Nothing elaborate. Let's see yours so I can get some ideas. Thanks.

Need caliper brake adapters from 76-79 B-body or 79-up R-body [email protected]

Do clutch rod and z bar from a 76 volare slant 6 work in a 76 Duster with a V8?

Looking for 3.91 or 4.10 ring and pinion for 489 case. [email protected]

I bought a used input shaft off ebay for my spare A833. I need to replace the input shaft on the spare because someone accidentally snapped of the first two inches of the shaft where it goes in the pilot hole when removing it from their car. The ebay seller sent me two input shaft saying...

Yes we can throw all kinds of money at our cars to go fast. .......but I want to build a low budget drag strip car. What I have so far: 71 Duster roller 8 3/4 rear home built frame connector relocated springs into rear frame 340 short block, zero deck cast pistons, steel crank...

Looking for a good set of heads for a 340. X's preferred, what do you have? [email protected]

I got a stock rebuilt standard bore 340 short block. I plan on putting this motor into a 71 Duster project. I don't think this car will see any street time just the strip. I am on the hunt for some heads, had a lead on some X's but it didn't pan out. So I'm looking at the EQ Iron Ram...

The MassMopar Cruise is on for Sunday Oct. 14th. It looks like we will have very nice weather for the cruise. We are meeting in Worcester at 11:00 am at the commuter parking lot right off Rte 20 on the way to Rte. 146 South There is a South Shore contingent meeting up at 99's on Rt140 in...

A have a cross member tranny bracket I aquired some time ago. It only has two mounting holes as appose to four like the one I pull from a 70 dart. Is this for a later year A body? What year(s)?

I have a flywheel that came from a 73 340 which I know has a cast crank and is externally balanced. I want to use this in my son's Duster that will have a 318 which I also know is internally balanced. Will this work without modifications? If this would not work I have an early 80's 360 that...

We are planning a cruise from Worcester, MA to Auto Rust Technician's shop in Cranston, RI where we will have a barbecue. Click here for more info

Could someone post a pic of where the FRAME BALL STUD BRACKET is on a 76 Duster. My son and I will be doing a 4 speed conversion. We finally have all the parts. We need to know where to mount this bracket. I see that Brewer's Performance sell this one. Is it like factory? Not that it...

Cookout @ Rutland Sate Park Sunday, September 23rd @ 12pm Rutland State Park is located in central Massachusetts. It has a pavilion, Rest rooms, picnic benches, barbecue pits and a nice field to park our cars. $5.00 per car to get into the park. It looks we will have great weather this...

Anybody have a spare clutch rod for sale? The rod that goes from the clutch pedal through the floor board and attaches to the Z bar. This will be for a 76 Duster Thanks, Tadjou [email protected]

I have an aluminum 4 speed bell housing that came off a 73 340 Duster. I need to know what it is worth for possible trade. Thanks, Tadjou