Search results for query: *

  1. mopartx

    Is my 340 being looked for? 399839 or close

    Just in case someone is looking for the 340 I have.
  2. mopartx

    m2 diecast anybody else into these

    I keep some extra mopars in Hot Wheels if you're looking for something in particular.
  3. mopartx

    m2 diecast anybody else into these

    I have some M2s either mopars and/or chases. I have more Hot Wheels than M2.
  4. mopartx

    m2 diecast anybody else into these

    I found the chase in that casting.
  5. mopartx

    Stroke with only Pistons and Crank?

    When 1st built it would do ok if I mixed race fuel with super. There is a gas station close by that I get ethanol free gas from(92 octane). I'm going to try some mixture with it. It just leads to more drive time. Thanks for the input
  6. mopartx

    Stroke with only Pistons and Crank?

    The next thing I would do is buy some aluminum heads for this engine in my 66 and put the X heads on my 72 dart. I'm about to put my 72 back together and just didn't have the money to spend at this time so it will get a freshened pair of J heads. I had wanted to "stroke the hell out" of 1 to...
  7. mopartx

    Stroke with only Pistons and Crank?

    I lost my sheet with all the numbers on my 340 build, it was in early 2002. It is probably pretty close, it doesn't like pump gas. When first built it didn't like pump gas much then I blew a head gasket and when I put the heads back on 2 years ago I must have put a thinner head gasket because it...
  8. mopartx

    Stroke with only Pistons and Crank?

    My 340 has a 360 crank with the 340 pistons milled to clear deck. Old School Storker is what my dad/I wanted to build and he had a lot of parts lying around. I know it's not the cheapest but it does have stock rod/pistons. I apologize if I misunderstood and I am speaking way out in left field.
  9. mopartx

    340 Harmonic Balancer Recomendation

    Thank you. I need to buy something.
  10. mopartx

    [WANTED] 68-69 340 intake manifold stock

    I have one also but I'm not much closer. I'm in Texas
  11. mopartx

    340 Harmonic Balancer Recomendation

    Did your crank pulley line up the first time? Is there a timing mark or did you have to put timing tape on it?
  12. mopartx

    Progress, but temp and gas gauges dont work.

    On mine I have to put it back together for a car show in a week and then I'll have to take it back apart later to at least paint it. If I have found a solution to my alt gauge problem I will address it then. Until then I'll bolt the leads back together and let it ride. It has been like that for...
  13. mopartx

    Progress, but temp and gas gauges dont work.

    Compared to my spare cluster this original cluster looks real clean.
  14. mopartx

    Progress, but temp and gas gauges dont work.

    Ok, thanks for info. I'll check my extra alt gauge it there is no way to tighten up the existing gauge. I still haven't seen anything that could be causing my connection problem on the left side of my cluster. I'm going to address the alt gauge first and then repaint the front of the cluster and...
  15. mopartx

    Progress, but temp and gas gauges dont work.

    Everything looks decent compared to others I've seen. My Alt gauge has a loose post but if I can't tighten it up I have another in a spare cluster I can try. Then I'll try to repaint the bezel. 2 questions since you seem to know more than myself. Here is a pick of the back of the cluster, should...
  16. mopartx

    WHAT SIZE DRAG RADIAL SS SPRING '65 DART

    It looks good. I don't seem to have that much room.
  17. mopartx

    Headlight Switch/Knob Removal

    The picture isn't there anymore.
  18. mopartx

    Progress, but temp and gas gauges dont work.

    My 66 Dart has gauge issues. At one point I was able to tap or push on the far left of the instrument cluster and they would work. However that hasn't worked in a while. I'm hoping to take mine apart in the next day or so. I'll update if I figure anything out.
  19. mopartx

    WHAT SIZE DRAG RADIAL SS SPRING '65 DART

    235/60-15 Mickey Thompson Drag radial rolled fender. 15x8
  20. mopartx

    Post your wheel and tire combos.

    17x8's front/rear 245/50-17 rear and 235/45-17 front. Post '74 dart/duster disc brakes front and 7 1/4 rear end.
  21. mopartx

    Year one 17 inch ralleys

    There are a tight fit but the front disc brakes and rear end are out of a post '74 dart/duster. 17x8 front with 235/45-17, 17x8 rear with 245/50-17
  22. mopartx

    Houston members!

    Thank you, it get out every now and then. I need to fix the a/c so it doesn't get out as much as I would like it too during the summer. MOE
  23. mopartx

    66 Dart Owners thread

    Pictures of my car are on page 9( I think) of this thread.
  24. mopartx

    66 Dart Owners thread

    I have a '66 with an A body 8.75, with 15x8 wheels. I had Road Hugger 245/60-15 then I put 235/60-15 BF drag radials on it. The wheel wells needed to be rolled(beat with a hammer) to have a better fit. With that being said, you can't get a finger in between the tire and wheel well on the right...
  25. mopartx

    66 Dart Owners thread

    I found this on craigslist Corpus, it looks pretty clean in pictures. MOE mailto:[email protected]?subject=1966%20DODGE%20DART%20-%20%2411500%20(CALALLEN)&body=%0A%0Ahttp%3A%2F%2Fcorpuschristi.craigslist.org%2Fcto%2F3097717361.html%0A
  26. mopartx

    Houston members!

    I saw this for sale on craigslist corpus if you know someone looking for a '66. MOE mailto:[email protected]?subject=1966%20DODGE%20DART%20-%20%2411500%20(CALALLEN)&body=%0A%0Ahttp%3A%2F%2Fcorpuschristi.craigslist.org%2Fcto%2F3097717361.html%0A
  27. mopartx

    Houston members!

    Here are a couple. MOE
Back
Top