Search results for query: *

Sold to Dennis in Idaho

I agree they can be fixed, I personally don't want to put in the effort since I am not going to use them.

I finally got a strong spring compressor and found the seats have a 1 angle valve grind, they ported them so much there does not look like enough remaining to fix it. I think they may scrap metal, the valves and hardware look good still....

I don’t know who did them. I would think you can trust Hughes Engines

Please use link for more pics Mopar W2 Top End package - auto parts - by owner - vehicle...

1976 I think

Mopar performance W2 Race cylinder heads Fits 340 and 360 LA engines Open Chamber Early casting with single exhaust bolt pattern. Ported intake and exhaust Intake runner 195cc exhaust runner 70cc Combustion chamber 66cc .370 valve stem 2.05” installed spring height 2.08” intake valve 1.6”...

Mopar Performance 3/8” Rocker Arm Adjusters Set/16 New P5007444AB ebay

I installed a set of Mopar Performance adjuster screws (with the required mod fro the lock nut ) on my 273 rockers and mocked up on the heads . You can see the rocker tip sliding off the valve stem at full lift (501") NOT OK I installed a set of CCA-621-16 .080" lash caps fronm Summit...

I put them on eBay too https://www.ebay.com/itm/195553260736

I changed the springs. Pictured are the Comp springs for my cam. I forgot to take that pic first, I also port matched the heads.

The sharpie numbers are the installed spring height I measured Advertised Spec is 1.80

Next I removed the valves

I just received a new set of edelbrock performer rpm cylinder heads 60779. From Summit. I should note that there was a lot of metal machining curls in the box and in all of the passages of the heads. I first put a strait edge on top of the valve stems. they are NOT all the same! 4 are and the...

Link to Craigs list add with new pics Mopar W2 Top End package - auto parts - by owner - vehicle...

Mopar performance W2 Race cylinder heads Open Chamber Early casting with single exhaust bolt pattern. Ported intake and exhaust Intake runner 195cc exhaust runner 70cc Combustion chamber 66cc .370 valve stem 2.05” installed spring height 2.08” exhaust valve 1.6” intake valve Stainless valves...

https://slo.craigslist.org/pts/7569814204.html 3000$

That looks like a horrible seat! I only see 1 angle

Here they are sitting on my block

I guess you could use them on the street. I bought them on a estate auction and dont know the flow numbers. they look way to radical for my daily driver

Nos Mopar performance W2 cylinder heads Full race porting 2.08 intake valves Holly Strip Dominator intake manifold race ported to match heads. Race porting done by Performance Racing engines Mesquite Texas. Thea’s are not for street use. They are for a. Race car. $5000 obo Possible Trade for...