Search results for query: *

Well, installed my 470 Low Deck for the final time in my 68 Dart and tried we tried a different approach. The engine was in the car before for mock up, but didn't have headers at the time. The engine went in pretty easy for mock up, but we decided to try bolting on the headers and transmission...

Hello, I am looking to run a 4 hole tapered spacer on my 470 and had a question for the group in regards to phenolic vs aluminum carb spacers. I was looking at a Jegs phenolic spacer that says it is good with temperatures up to 400 degrees, which seems to be pretty high. This is going on a...

Looking to see if anyone has experience installing the US Car Tool torque boxes and subframe connectors. My questions is, do you stitch weld the subframe connectors to the floor pan, or completely weld them? I think the torque boxes would get weld completely, but the subframe connectors would...

Thought I would share some pictures as I recent mocked up the 22" Cold Case Radiator in my 68 Dart with a big block. I am running an electric water pump in a factory style aluminum housing and the fans and shroud were made to make it fit. (I tried a single 16" electric fan to start with, but...

My 470 is heading to the dyno in the next few weeks and wanted to see estimates on numbers. Here is the details of the build: 400 low deck with eagle 3.91 crank and 6.760 Rods - balanced rotating assembly Ross Pistons - 11.2 Compression Ratio Indy SR Heads ported by Indy to flow 351 CFM @...

I am reaching the mid point of a 68 dart build and am looking for some insight. I had purchased a 470 locally as I know the shop that built it. The engine utilizes INDY S/R heads that were fully ported by Indy (Flowsheet says 351 CFM intake and 233.1 EX @.606) Bottom end is eagle 3.91 crank...

Complete 273 engine, 904 trans, and V8 K member with suspension out of a 1968 Dart Dart GT. Motor is currently on run stand so you can hear it run. Suspension bushings, balls joints, and brakes (Drums - 5X4" pattern) are all in good shape. Everything is included in the picture minus steering...

Set of 4ea 15 X 7 Cragar SS Wheels 5 X 4 bolt pattern with BF Goodrich Radial T/A, P 215 /60R15 tires. I believe rims are part number 1521912402B and have a 4.1250 back spacing. Chrome is perfect and 2 tires are almost new. The other two tires are 50-60% tread. Comes with lugs nuts. Fit...