Search results for query: *

Well another success story with Bonami, not even a 1/4 teaspoon down the carburetor and oil consumption and slight smoking gone! What a great way to solve the problem. I have doubted this in the past but figured what the heck, gave it a shot and worked wonderful. Thanks Bonami!:cheers:

Hello, so i am trying to get my new carb dialed in, i have went from 65 primary jets to 67, I have also put the quick change cover for the secondary springs on. Holley says you should not have a "seat of the pants feeling" when the secondaries open, and by god thats what i have. I also am...

Hello folks, well i have read a ton of stuff on the forum, my 4-ways work fine. I have looked for the other flasher and cannot find it. Next to the ashtray, by the radio, glove box, EVERYWHERE! There is a 3 pin plug hanging to the left of the ashtray. It has 2 pink wires doubled into 1. 2...

Hello folks, well i built my first motor, and just curious what your thoughts on my horsepower and compression might be??? Its a 1973 360 out of a motorhome, i did a rebuild and these are my specs. KB107 pistons. COMP.XE268 cam, lifters, pushrods and double spring kit all shimmed within .004...

Hello everyone, how are things? Well i am about ready to bring out the cutting torch to this door. It WILL not open from the inside or out, the door acts like its not closed all the way. The door panels are off on both doors, i cant see any reason why this is happening when comparing to the...

I installed this kit in my 727, and now the car has reverse only and almost feels like it is fighting itself when put in a any forward gear. I have removed the valve body and tore down looking for mistakes i may have made, i am not finding any. Could i or should i have removed a specific check...

Hello, After installing my TF-1 kit my car feels like it is binding/fighting itself in forward gears, wont move, has reverse. So i reviewed my instructions on my TF-1 kit and found that i used the drill plate and spacer provided on my 73 727, in the instructions it says 1977 and up. Could...

So i am building a 71 dart, was a slant 6 car. I did a moderate build on the motor, 360/727. The motor runs great... I put a Transgo TF-1 kit in trans. And a Hughes 2000 stall. When i went to go on first test drive i discovered that in forward gears, the car seem "locked" will not move, however...